Crankshaft Gear - Remove and Install
Removal Procedure
Show/hide table
Required Tools     | |||
Tool     | Part Number     | Part Description     | Qty     |
A     | 1U-6400     | Three Jaw Puller     | 1     |
Start By:
- Remove the crankshaft. Refer to Disassembly and Assembly, "Crankshaft - Remove".
- Use Tooling (A) in order to remove crankshaft gear (2) from crankshaft (1) .
Show/hide table
Illustration 1 | g01022856 |
- Remove drive pin (3) .
Installation Procedure
Show/hide table
Required Tools     | |||
Tool     | Part Number     | Part Description     | Qty     |
B     | 6V-2098     | Press Sleeve     | 1     |
C     | 8H-8581     | Gauge     | 1     |
- Install drive pin (3) .
Show/hide table
Illustration 2 | g01066237 |
- Raise the temperature of crankshaft gear (2) .
Show/hide table
Always wear protective gloves when handling parts that have been heated. |
- Install crankshaft gear (2) on the end of crankshaft (1) . Ensure that the slot in crankshaft gear (2) is aligned with drive pin (3) .
- Use Tooling (B) in order to seat crankshaft gear (2) against the shoulder of crankshaft (1) .
Show/hide table
Illustration 3 | g01066239 |
- Use Tooling (C) in order to ensure that crankshaft gear (2) is seated against the shoulder on the crankshaft.
Note: Check the crankshaft gear in three places with Tooling (C) .
End By: Install the crankshaft. Refer to Disassembly and Assembly, "Crankshaft - Install".
Caterpillar Information System:
3512B Petroleum Engines Aftercooler Coolant Temperature
3512B Petroleum Engines ECM Voltage
3512B Petroleum Engines Engine Oil Filter Differential Pressure
3512B Petroleum Engines Fuel Filter Differential Pressure
3512B Petroleum Engines Exhaust Temperature
3512B Petroleum Engines Low Coolant Temperature
3512B Petroleum Engines Crankcase Pressure
3512B Petroleum Engines Altitude Derate Feature
3176C and 3196 Marine Engines Coolant Temperature Sensor - Remove and Install
3176C and 3196 Marine Engines Lifter Group - Remove and Install
3176C and 3196 Marine Engines Inlet and Exhaust Valve Guides - Remove and Install
2000/02/01 Shorter Bolts For Mounting The Radiator Support Brace To The Radiator Top Tank Are Used {1353}
3176C and 3196 Marine Engines Crankshaft - Remove
3176C and 3196 Marine Engines Crankshaft - Install
2000/02/01 114-2410 Pyrometer Battery Shelf Life Extended {7466}
2000/02/01 Electronic Marine Engine Installation Guides are now Available {1000, 7451}
3176C and 3196 Marine Engines Crankshaft Main Bearings - Remove
3176C and 3196 Marine Engines Crankshaft Main Bearings - Install
3408E and 3412E Engines for Caterpillar Built Machines Engine Design
Product Link 151/201 System Overview
3176C and 3196 Marine Engines Cylinder Liner - Remove
3500B and 3500B High Displacement Generator Set Engines Electronic Control Terms
3176C and 3196 Marine Engines Cylinder Liner - Install
3176C and 3196 Marine Engines Crankshaft Front Seal - Remove