Fuel Tank - Install
Installation Procedure
- Install fuel tank (13) to the machine with a suitable lifting strap. Weight of the fuel tank is 23 kg (51 lb).
Show/hide table
Illustration 1 | g00551348 |
- Install washers, two nuts (12), and two bolts (11) to the bottom of the fuel tank. Tighten the bolts and the nuts.
Show/hide table
Illustration 2 | g00557547 |
- Install hoses and tighten clamps (10) .
Show/hide table
Illustration 3 | g00551340 |
- Connect electrical connector (9) .
- Install right side support assembly (8) .
Show/hide table
Illustration 4 | g00551332 |
- Install the washer and bolt (7) to the fuel tank.
- Install washers and two bolts (6) to the fuel tank.
Show/hide table
Illustration 5 | g00551326 |
- Install battery cover (5) with the washer and bolt (4) .
Show/hide table
Illustration 6 | g00551324 |
- Install fuel tank access cover (3) to the bracket with washers and two bolts (2) .
Show/hide table
Illustration 7 | g00551322 |
- Close the fuel tank access cover.
Show/hide table
Illustration 8 | g00551301 |
- Lock fuel tank access cover (1) .
End By: Refill the fuel tank. Refer to Operation and MaintenanceSEBU7203, "Fuel Tank Water and Sediment - Drain".
Caterpillar Information System:
302.5 Mini Hydraulic Excavator Machine Systems Fuel Tank - Remove
302.5 Mini Hydraulic Excavator Machine Systems Counterweight - Remove and Install
302.5 Mini Hydraulic Excavator Machine Systems Boom Swing Cylinder - Remove and Install
302.5 Mini Hydraulic Excavator Machine Systems Boom - Remove and Install
5110B Excavator, 24H Motor Grader, 69D, 769D, 773D, 773E, 776D and 777D Off-Highway Truck/Tractors, 771D, 775D and 775E Quarry Trucks and AD40 Series II, AD45 and AE40 II Underground Articulated Trucks Caterpillar Monitoring System Service Meter Mode
302.5 Mini Hydraulic Excavator Machine Systems Boom Cylinder - Remove and Install
302.5 Mini Hydraulic Excavator Machine Systems Stick - Remove and Install
302.5 Mini Hydraulic Excavator Machine Systems Stick Cylinder - Remove and Install
302.5 Mini Hydraulic Excavator Machine Systems Bucket Cylinder - Remove and Install
302.5 Mini Hydraulic Excavator Machine Systems Bucket Linkage - Remove and Install
302.5 Mini Hydraulic Excavator Machine Systems Bucket - Remove and Install
302.5 Mini Hydraulic Excavator Machine Systems Accumulator (Hydraulic Pilot) - Remove and Install
302.5 Mini Hydraulic Excavator Machine Systems Seat - Remove and Install
302.5 Mini Hydraulic Excavator Machine Systems Cab Heater - Remove and Install
312B Excavator Machine Systems Travel Motor - Disassemble
302.5 Mini Hydraulic Excavator Machine Systems Cab - Remove and Install
302.5 Mini Hydraulic Excavator Machine Systems Track - Remove and Install
302.5 Mini Hydraulic Excavator Machine Systems Track Roller - Remove and Install
302.5 Mini Hydraulic Excavator Machine Systems Track Carrier Roller - Remove and Install
302.5 Mini Hydraulic Excavator Machine Systems Front Idler and Track Adjuster - Remove
S3 Shear and CR3 Crusher Cutting Arm
302.5 Mini Hydraulic Excavator Machine Systems Front Idler - Disassemble
302.5 Mini Hydraulic Excavator Machine Systems Front Idler - Assemble
302.5 Mini Hydraulic Excavator Machine Systems Track Adjuster - Disassemble