Swivel - Assemble
- Be sure that all of the internal parts of the rotary joint are thoroughly clean and free of dirt and debris.
Show/hide table
Illustration 1 g00551208 - Check the condition of seals (9) and O-ring seals (3) and (7). If the seals are damaged, use new parts for replacement.
- Install nine seals (9) in housing (5). Install O-ring seal (7) in housing (5). Put 5P-0960 Molybdenum Grease on the seals.
Show/hide table
Illustration 2 g00551416 - Install a new dust seal (6) in housing (5). Install the seal so that the lip is facing outward, as shown. Properly seat the seal in the housing.
Show/hide table
NOTICE Do not damage the dust seal when installing the rotor into the housing.
- Put 5P-0960 Molybdenum Grease on both ends of rotor (10). Be sure that there is grease on the rotor area that contacts dust seal (6) and O-ring (7). Install rotor (10) in housing (5).
- Install spacer (4) on rotor (10) and in housing (5). Install snap ring (8) on rotor (10).
- Put 5P-0960 Molybdenum Grease on O-ring seal (3). Install the O-ring seal in the top of housing (5).
- Install cover (2) and four bolts (1) that hold the cover in place.
End By:
- Install the swivel. Refer to Disassembly and Assembly, "Swivel - Install" in this manual.
Caterpillar Information System:
307B Excavator Machine Systems Swivel - Disassemble
317B Excavator Machine System and Attachment Specifications Stick Lines
3064 and 3066 Engines for Caterpillar Built Machines Gear Group (Front)
3046 Engine For Caterpillar Built Machines Flywheel - Install
320B Excavator Machine System Specifications Stick - 6280 mm (247.2 inch)
M312, M315, M318 and M320 Excavators Hydraulic System Pump Control (Main Hydraulic)
317B Excavator Machine System and Attachment Specifications Boom -
5110B Excavator, 24H Motor Grader, 69D, 769D, 773D, 773E, 776D and 777D Off-Highway Truck/Tractors, 771D, 775D and 775E Quarry Trucks and AD40 Series II, AD45 and AE40 II Underground Articulated Trucks Caterpillar Monitoring System Harness Code Mode
3064 and 3066 Engines for Caterpillar Built Machines Cylinder Head - 3064
320B Excavator Machine System Specifications Lines (Stick Cylinder)
317B Excavator Machine System and Attachment Specifications Lines (Stick Cylinder)
M312, M315, M318 and M320 Excavators Hydraulic System Main Hydraulic Pump
3064 and 3066 Engines for Caterpillar Built Machines Camshaft
3046 Engine For Caterpillar Built Machines Crankshaft Rear Seal - Remove
307B Excavator Machine Systems Swing Motor - Remove
307B Excavator Machine Systems Swing Motor - Install
3046 Engine For Caterpillar Built Machines Crankshaft Rear Seal - Install
317B Excavator Machine System and Attachment Specifications Stick Lines - Short
3046 Engine For Caterpillar Built Machines Flywheel Housing - Remove and Install
317B Excavator Machine System and Attachment Specifications Lines (Stick) - Clamshell
307B Excavator Machine Systems Swing Motor - Disassemble
5130 Excavator Hydraulic System Cooler (Pump Drive Lubrication)
317B Excavator Machine System and Attachment Specifications Lines (Stick) - Long with Medium Pressure
5130 Excavator Hydraulic System Gear Pump (Pump Drive Lubrication)