Blade Linkage - Lubricate
Lower all the work tools and the blade to the ground.
Show/hide table
| |
| Illustration 1 | g00522378 |
Show/hide table
| |
| Illustration 2 | g00522380 |
Wipe all fittings before lubricating.
- Apply lubricant to the fitting for the rod end of the blade cylinder (2). Apply lubricant to the fittings for the head end of the blade cylinder (3).
- Apply lubricant to the fittings for the arms (1) that support the blade.
Caterpillar Information System:
302.5 Mini Hydraulic Excavator Cooling System Coolant Level - Check
315B Excavator Excavator Systems Track Roller - Install
315B Excavator Excavator Systems Track Roller - Assemble
302.5 Mini Hydraulic Excavator Cooling System Hoses - Inspect
315B Excavator Excavator Systems Track Roller - Disassemble
3176C and 3196 Industrial Engines Electronic Control Module - Remove and Install
A13 Auger Chain - Lubricate
315B Excavator Excavator Systems Track Carrier Roller - Assemble
A13 Auger Chain - Inspect/Adjust
3176C and 3196 Engines For Caterpillar Built Machines Crankshaft Gear - Remove and Install
3176C and 3196 Engines For Caterpillar Built Machines Camshaft Gear - Remove and Install
5130 Excavator Hydraulic System Solenoid Valve (Bottom Dump)
302.5 Mini Hydraulic Excavator Fuel Tank Water and Sediment - Drain
5130 Excavator Hydraulic System Control Valve (Travel Parking Brake Dual Pressure)
320B Excavator Machine System Specifications Fuel Tank
320B Excavator Machine System Specifications Lines (Front)
315B Excavator Excavator Systems Track - Connect
315B Excavator Excavator Systems Front Idler, Recoil Spring and Hydraulic Track Adjuster - Remove and Install
320B Excavator Machine System Specifications Lines (Front)
315B Excavator Excavator Systems Front Idler - Disassemble
3046 Engine For Caterpillar Built Machines Exhaust Manifold - Remove and Install
315B Excavator Excavator Systems Front Idler - Assemble
3406E On-Highway Engine Engine Oil Pump - Assemble
3176C and 3196 Engines For Caterpillar Built Machines Connecting Rod Bearings - Remove