Accessory Drive - Assemble
Show/hide table
所需工具 | |||
工具 | 零件号 | 零件描述 | 数量 |
B | 1P-1858 | 挡圈钳 | 1 |
- 降低齿轮和轴 (2) 的温度。
Show/hide table
操作已经加热的零件时要坚持戴防护手套。
- 升高轴承 (3) 的温度。
- 将轴承 (3) 放在齿轮和轴 (2) 上的原始位置中。
- 使用工具 (E) 将挡圈 (4) 安装在附件驱动装置壳体 (5) 上。
- 将齿轮和轴 (2) 以及轴承 (3) 安装在附件驱动装置壳体 (5) 内。
- 安装螺栓 (1)。
Show/hide table
图 1 | g01062840 |
结束:
- 安装附件驱动器。 请参阅拆解和组装, "附件驱动器 - 安装"。
Caterpillar Information System:
3176C and 3196 Engines For Caterpillar Built Machines Accessory Drive - Disassemble
302.5 Mini Hydraulic Excavator Bucket Linkage - Lubricate
5130 Excavator Hydraulic System Solenoid Valve (Boom Float)
3176C and 3196 Engines For Caterpillar Built Machines Crankshaft Rear Seal Carrier - Remove and Install
317B Excavator Machine System and Attachment Specifications Lines (Travel Motor)
5130 Excavator Hydraulic System Relief Valve (Pilot)
3176C and 3196 Engines For Caterpillar Built Machines Turbocharger - Install
307B Excavator Attachment Hydraulic System Two Pump Operation
365B, 365B Series II, 365BL and 365BL Series II Excavators Machine Systems Final Drive - Assemble
3176C and 3196 Engines For Caterpillar Built Machines Turbocharger - Remove
302.5 Mini Hydraulic Excavator Boom and Stick Linkage - Lubricate
3114, 3116 and 3126 MUI Engine Governors Governor (Type I) - Disassemble
5130 Excavator Hydraulic System Solenoid Valve (Swing Parking Brake)
5130 Excavator Hydraulic System Solenoid Valve (Bottom Dump)
3176C and 3196 Engines For Caterpillar Built Machines Camshaft Gear - Remove and Install
3176C and 3196 Engines For Caterpillar Built Machines Crankshaft Gear - Remove and Install
A13 Auger Chain - Inspect/Adjust
315B Excavator Excavator Systems Track Carrier Roller - Assemble
A13 Auger Chain - Lubricate
3176C and 3196 Industrial Engines Electronic Control Module - Remove and Install
315B Excavator Excavator Systems Track Roller - Disassemble
302.5 Mini Hydraulic Excavator Cooling System Hoses - Inspect
315B Excavator Excavator Systems Track Roller - Assemble
315B Excavator Excavator Systems Track Roller - Install