Stick - 3.0 m (9.84 ft)
Show/hide table
Illustration 1 | g03398910 |
Show/hide table
Specification for 123-8942 Hoe Stick Gp     | |||
Item     | Qty     | Part     | Specification Description     |
All bores must be free of paint. Use 5P-0960 Grease Cartridge in order to coat all bores for the pins, the bushings , the bucket, and the cylinder pin bores.     | |||
1     | 1     | 169-1360 Pin As     | Diameter is 49.850 ± 0.025 mm (1.9626 ± 0.0010 inch).     |
2     | 1     | 172-5863 Pin As     | Diameter is 59.850 ± 0.025 mm (2.3563 ± 0.0010 inch).     |
3     | 4     | 113-4982 Bushing     | Bore before assembly is 70.230 ± 0.020 mm (2.7650 ± 0.0008 inch).     |
Installation depth is 7.5 ± 0.5 mm (0.30 ± 0.02 inch). |
|||
4     | 2     | 9R-7273 Spacer     | As required, use the spacer of thickness 1.0 mm (0.04 inch) to adjust the maximum lateral thickness of 1.0 mm (0.04 inch).     |
5     | As required, use the following shims in order to adjust the maximum lateral clearance to 1.0 mm (0.04 inch):     |
||
1 | 133-2717 Shim     | Thickness is 0.5 mm (0.02 inch).     |
|
1 | 093-0065 Shim     | Thickness is 1.0 mm (0.04 inch).     |
|
6     | 1     | 163-7168 Shim     | As required, use the shim of thickness 0.5 mm (0.02 inch) to adjust maximum lateral clearance of 1.0 mm (0.04 inch).     |
7     | 1     | 093-0097 Shim     | As required, use the shim of thickness 2.0 mm (0.08 inch) to adjust maximum lateral clearance of 1.0 mm (0.04 inch).     |
8     | 2     | 114-4866 Bushing     | Bore before assembly is 50.18 ± 0.02 mm (1.976 ± 0.001 inch).     |
Installation depth is 7.5 ± 0.5 mm (0.30 ± 0.02 inch). |
|||
9     | 2     | 7X-2552 Bolt     | Torque to 300 ± 40 N·m (221 ± 30 lb ft).     |
10     | 4     | 093-1434 Lip Type Seal     | Lubricate the sealing lip lightly with the lubricant that is being sealed.     |
11     | 2     | 114-4850 Lip Type Seal     | Lubricate the sealing lip lightly with the lubricant that is being sealed.     |
Caterpillar Information System:
M312 Excavator Machine System Stick - 2.6 m (8.53 ft)
315B Excavator Machine Systems Final Drive and Travel Motor - Install
315B Excavator Machine Systems Final Drive and Travel Motor - Remove
315B Excavator Machine Systems Main Control Valve - Disassemble
322B Excavator Hydraulic System Piston Pump (Main) - Test
315B Excavator Machine Systems Main Control Valve - Install
315B Excavator Machine Systems Final Drive and Travel Motor - Assemble
M312 Excavator Machine System Stick - 2.3 m (7.55 ft)
322B Excavator Hydraulic System Pump Control (Negative Flow) - Test
315B Excavator Machine Systems Main Control Valve - Remove
322B Excavator Hydraulic System Relief Valve (Travel Motor) - Test and Adjust
322B Excavator Hydraulic System Relief Valve (Swing) - Test and Adjust
M312 Excavator Machine System Boom Cylinder
301.5, 301.6 and 301.8 Mini Hydraulic Excavators Safety Messages
Air Conditioning and Heating R134a for All Caterpillar Machines Refrigerant Expansion Valve - Remove and Install
315B Excavator Machine Systems Main Control Valve - Assemble
312B, 320B, 322B, 325B, 330B and 345B Excavators Air Conditioning and Heating Systems with R-134a Refrigerant Control Panel (Air Conditioner and Heater)
M312 Excavator Machine System Boom Cylinder
312B Excavator Attachments One-Way Hydraulic Flow Operation
M312 Excavator Machine System Boom Cylinder
Air Conditioning and Heating R134a for All Caterpillar Machines Refrigerant Compressor - Remove and Install
M312 Excavator Machine System Stick Cylinder
312B, 320B, 322B, 325B, 330B and 345B Excavators Air Conditioning and Heating Systems with R-134a Refrigerant Control Module - Main Control Module - Heater/Air Conditioner Unit
M312 and M315 Excavators Boom, Stick and Bucket Operation