Alternator - Remove and Install
Show/hide table
| NOTICE |
|---|
|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Remove cover (1).
Show/hide table
Illustration 2 g01098164 - Remove alternator belt (2).
- Disconnect harness assembly (6).
- Remove bolt (3) and bolt (4).
- Remove alternator (5).
Show/hide table
| |
| Illustration 1 | g01098163 |
Show/hide table
| NOTICE |
|---|
|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Position alternator (5) on the engine.
- Install bolt (3) and bolt (4).
- Connect harness assembly (6). Tighten the nuts to a torque of
7.1 ± 0.8 N·m (63 ± 7 lb in) . - Install alternator belt (2).
Show/hide table
Illustration 4 g01098163 - Install cover (1) on the front of the engine.
Show/hide table
| |
| Illustration 3 | g01098164 |
Caterpillar Information System:
Generator Set Control Panel for Switchgear Conversion CID 0821 FMI 04 Display Power Supply Voltage Below Normal - Test
Electric Protection System Energize-To-Run For Generator Set, Industrial and Marine Diesel Engines General Troubleshooting Information
G3606 and G3608 Engines Valve Mechanism - Install
Generator Set Control Panel for Switchgear Conversion CID 0821 FMI 03 Display Power Supply Voltage Above Normal - Test
797 Off-Highway Truck Power Train Relief Valve (Torque Converter Inlet)
Generator Set Control Panel for Switchgear Conversion CID 0819 FMI 02 Display Data Link Incorrect - Test
Generator Set Control Panel for Switchgear Conversion CID 0460 FMI 08 Pressure Sensor (Fuel) Abnormal Signal - Test
Generator Set Control Panel for Switchgear Conversion CID 0248 FMI 02 CAT Data Link Incorrect - Test
Generator Set Control Panel for Switchgear Conversion CID 0175 FMI 08 Temperature Sensor (Engine Oil) Abnormal Signal - Test
G3606 and G3608 Engines Valve Mechanism - Remove
Electric Protection System Energize-To-Shutoff (ETS) For Generator Set, Industrial and Marine Diesel Engines Troubleshooting the ETS Partial Protection System (OP, WT) - 3200-3400 Engines
Generator Set Control Panel for Switchgear Conversion CID 0172 FMI 04 Temperature Sender (Inlet Air) Voltage Below Normal - Test
797 Off-Highway Truck Power Train Relief Valve (Torque Converter Outlet)
Generator Set Control Panel for Switchgear Conversion CID 0827 FMI 08 Temperature Sensor (Left Exhaust) Abnormal Signal - Test
Electric Protection System Energize-To-Run For Generator Set, Industrial and Marine Diesel Engines Electric Protection System Functional Test
Generator Set Control Panel for Switchgear Conversion CID 0828 FMI 08 Temperature Sensor (Right Exhaust) Abnormal Signal - Test
Electric Protection System Energize-To-Run For Generator Set, Industrial and Marine Diesel Engines Overspeed Verification Test
3500B High Displacement Generator Set Engines Air Starting Motor - Inspect
3500B and 3500 Marine Propulsion Engines with EUI Option Electric Starting Motor - Inspect
3508B, 3512B, and 3516B High Displacement Generator Sets Prelube Pump - Inspect
3500B Locomotive Engines Air Compressor - Inspect
Electric Protection System Energize-To-Run For Generator Set, Industrial and Marine Diesel Engines Overspeed Calibration
3508B, 3512B, and 3516B High Displacement Generator Sets Engine Oil Filter Differential Pressure - Check
3500 and 3500B Engines Fuel System Fuel Filter Differential Pressure - Check