Engine Oil Pump - Remove
拆卸步骤
Show/hide table
所需工具     | |||
工具     | 零件号     | 零件说明     | 数量     |
A     | 138-7573     | 连杆支架     | 1     |
Show/hide table
热油和热的部件可能会导致人身伤害。 不要使热油或热的部件与皮肤接触。 在执行任何维修工作前,请确保发动机和部件得到充分冷却,以便可以和裸手接触。 |
Show/hide table
注意 |
---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
- 让发动机在停机后冷却。 这将使机油冷却。 机油泵、机油滤清器和机油冷却器的多余油量可排回油底壳。
- 从油底壳排出机油。
Show/hide table
图 1 | g00546993 |
G3606 发动机 |
Show/hide table
图 2 | g00546994 |
G3608 发动机 |
Show/hide table
图 3 | g00546995 |
G3608 发动机 |
- 卸下将法兰 (3) 和垫片 (1) 固定到机油泵的螺栓。 卸下垫片。
- 卸下法兰 (3) 和管 (5) 。
- 卸下固定 T 形管 (2) 和机油泵 (4) 的螺栓。
- 将起重机和工具 (A) 固定至机油泵 (4) 上。
- 卸下将机油泵 (4) 固定到前壳体的螺栓。
- 将两个 1/2 英寸加压螺钉安装至机油泵内。 均匀上紧顶出螺钉。 卸下机油泵 (4) 。 机油泵的重量约为 104 kg (230 lb)。
- 从前壳体上卸下两个 O 形密封圈。
- 从机油泵上卸下 O 形密封圈。
Caterpillar Information System:
3054 Engine for Caterpillar Built Machines Front Cover - Install
G3606 and G3608 Engines Lubrication Metering Pump - Remove and Install
3054 and 3056 Industrial and Generator Set Engines Front Cover - Remove and Install
3054 Engine for Caterpillar Built Machines Flywheel - Install
Guidelines For 3600 Heavy Fuel Oil (HFO) Engines{1000} Guidelines For 3600 Heavy Fuel Oil (HFO) Engines{1000}
3054 Engine for Caterpillar Built Machines Flywheel - Remove
3054 Engine for Caterpillar Built Machines Camshaft - Remove and Install
3054 and 3056 Industrial and Generator Set Engines Water Temperature Regulator - Remove and Install
Electronic Modular Control Panel II+ (EMCP II+) Pulse Width Modulated (PWM) Sensor - Test
3612 and 3616 Fast Vessel Engines Cooling System Coolant (ELC) - Change
3408E and 3412E Engines for Caterpillar Built Machines Speed/Timing Sensor - Remove and Install
G3606 and G3608 Engines Prelubrication Oil Pump - Assemble
3054 Engine for Caterpillar Built Machines Valve Mechanism Cover - Remove and Install
3406E Truck Engine Housing (Front)
3408E and 3412E Engines for Caterpillar Built Machines Coolant Temperature Sensor - Remove and Install
3054 Engine for Caterpillar Built Machines Engine Oil Pan - Remove and Install
3408E and 3412E Engines for Caterpillar Built Machines Engine Oil Pressure Sensor - Remove and Install
3176C Engine S·O·S Oil Analysis
3176C Engine Safety Signs and Labels
3408E and 3412E Engines for Caterpillar Built Machines Fuel Temperature Sensor - Remove and Install
Generator Set Control Panel for Switchgear Conversion Action Alarm and Alarm Silence Switch
3408E and 3412E Engines for Caterpillar Built Machines Electronic Control Module - Remove and Install
3606 and 3608 Engines General Information (Fuel System)
3408E and 3412E Engines for Caterpillar Built Machines Engine Oil Temperature Sensor - Remove and Install