3054 Truck Engine Caterpillar


Fuel Injection Pump

Usage:

3054 6NR
Fuel Injection Pump (Bosch)


Illustration 1g00558517

Fuel Injection Pump (Typical Example)

(1) Tighten the fuel line nut to the following torque: ... 22 N·m (16 lb ft)

Tighten the nut of the drive gear (not shown) to the following torque: ... 28 N·m (20 lb ft)

Caterpillar Information System:

3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B and 3516C Engines Caterpillar Monitoring System General Information
3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B and 3516C Engines Caterpillar Monitoring System Warning Operation
3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B and 3516C Engines Caterpillar Monitoring System Harness Code Mode
3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B and 3516C Engines Caterpillar Monitoring System Units Mode
3412E and C30 Marine Engines Monitoring System
3054 Truck Engine Engine Design
3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B and 3516C Engines Caterpillar Monitoring System Tattletale Mode
3176C Engine Air Compressor
3612 and 3616 Engines Pressure Regulating Valve
3176C and 3196 Engines For Caterpillar Built Machines Cylinder Liner - Remove
3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B and 3516C Engines Caterpillar Monitoring System Service Mode
3606 and 3608 Engines Engine Support
3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B and 3516C Engines Caterpillar Monitoring System Electrical Components And Connector Locations
3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B and 3516C Engines Caterpillar Monitoring System Service Tools
3412E and C30 Marine Engines Basic Block
3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B and 3516C Engines Caterpillar Monitoring System Accessing Diagnostic Information
3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B and 3516C Engines Caterpillar Monitoring System Troubleshooting Diagnostic Codes
330B Excavator Machine System Specifications Track Roller (Single Flange)
3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B and 3516C Engines Caterpillar Monitoring System CID 0096 FMI 03 Level Switch (Fuel) Voltage Above Normal - Test
3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B and 3516C Engines Caterpillar Monitoring System CID 0127 FMI 08 Pressure Sensor (Transmission Oil) Abnormal Signal - Test
3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B and 3516C Engines Caterpillar Monitoring System CID 0172 FMI 04 Temperature Sender (Inlet Air) Voltage Below Normal - Test
3412E and C30 Marine Engines Air Inlet And Exhaust System
3406C (PEEC III) Truck Engines Compression Brake
3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B and 3516C Engines Caterpillar Monitoring System CID 0175 FMI 04 Temperature Sender (Engine Oil) Voltage Below Normal - Test
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.