SEBF8392-01
May 2000
SMCS Code: 0000

SHOP REVIEW

This Guideline enables dealers and their customers to benefit from cost reductions made possible through an established parts reusability and salvage program. Every effort has been made to provide the most current and relevant information known to Caterpillar Inc. Since the Company makes ongoing changes and improvements to its products, this Guideline must be used with the latest technical information available from Caterpillar to ensure such changes and improvements are incorporated where applicable.

For questions or additional information concerning this Guideline, contact Caterpillar Service Support Division, Dealer Support (309) 675-5156.

The following pages contain visual examples of dealer manufactured products used to improve efficiency of specialization shops. These stands are currently being used by dealers to clean and inspect engines.

Caterpillar does not recommend any one design, but each design should be compatible with the methods and cleaning equipment available at the dealership.

Illustration 1

Rollover stand

Illustration 2

Rollover stand.

Illustration 3

3500 Series Engine rollover stand.

Illustration 4

Close-up of rollover stand.

Illustration 5

Close-up of rollover stand.

Illustration 6

Close-up of rollover stand.

Illustration 7

Close-up of rollover stand.

Illustration 8

3500 Series Engine dyno stand.

Illustration 9

3500 Engine stand.

Illustration 10

Shortblock stands.

Illustration 11

793 Turbos built on shortblock stands.

Illustration 12

3500 Series Engine rear stand.

Illustration 13

3500 Series Engine front stand.

Illustration 14

3500 Engine stand.

Illustration 15

3500 Engine stand.

Illustration 16

Cylinder block cabinet wash stand.

Illustration 17

Cylinder block cabinet wash stand.