Cylinder Liner
Show/hide table
Illustration 1 | g00517737 |
Outside diameters of the cylinder liner
- Position (A) ...
151.25 ± 0.05 mm (5.955 ± .002 inch) - Position (B) ...
147.90 ± 0.03 mm (5.823 ± .001 inch) - Position (C) ...
141.38 ± 0.08 mm (5.566 ± .003 inch) - Position (B) ...
Bore diameter for the cylinder liner ...
Note: Apply 5P-3975 Rubber Lubricant to the cylinder liner seal prior to assembly.
Caterpillar Information System:
3406E On-Highway Engine Housing (Front) - Install
3406E On-Highway Engine Housing (Front) - Remove
3304B and 3306B Engines for Caterpillar Built Machines Turbocharger - Assemble
3524B Engines for Off-Highway Trucks Too Much Vibration
C-12 Truck Engine Cylinder Liner
3304B and 3306B Engines for Caterpillar Built Machines Turbocharger - Disassemble
3406E and 3456 Engines for Caterpillar Built Machines Rocker Arm and Shaft - Remove
3406E On-Highway Engine Rocker Arm and Shaft - Install
3406E On-Highway Engine Inlet and Exhaust Valve Springs - Remove and Install
3524B Engines for Off-Highway Trucks Excessive White Smoke
3406C Engines for Caterpillar Built Machines Flywheel
3176C and 3196 Industrial Engines Cylinder Head - Remove
3524B Engines for Off-Highway Trucks Too Much Valve Lash
G3300 Engines Cylinder Pressure - Measure/Record
3406E On-Highway Engine Fan Drive - Disassemble
3304B and 3306B Engines for Caterpillar Built Machines Water Temperature Regulator - Remove and Install
3406E On-Highway Engine Fan Drive - Assemble
3406E On-Highway Engine Fan Drive - Remove
3406E and 3456 Generator Set Engines Fan Drive - Install
G3300 Engines Engine Air Cleaner Service Indicator - Inspect
3176C Engine Cooling System Coolant (DEAC) - Change
3406E Engine Speed/Timing Sensor - Remove and Install
3406C (PEEC III) Truck Engines Glossary of Electronic Control Terms
3406E On-Highway Engine Coolant Temperature Sensor - Remove and Install