Flywheel - Remove
Show/hide table
Required Tools | |||
---|---|---|---|
Tool | Part Number | Part Description | Qty |
A | 138-7573 | Lifting Bracket | 2 |
B | FT2712 | Guide Stud | 2 |
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Install Tooling (A) on the flywheel. Use a suitable lifting device. The weight of the flywheel is approximately
65 kg (143 lb) . - Remove two bolts (1). Install Tooling (B).
- Remove remaining bolts (1) that hold the flywheel to the crankshaft . Remove flywheel (2).
Show/hide table
Illustration 2 g01042415 - If necessary, use a hammer and a punch in order to remove ring gear (3) from flywheel (2).
Show/hide table
Illustration 1 | g01042414 |
Caterpillar Information System:
3176C and 3196 Engines For Caterpillar Built Machines Valve Mechanism Cover - Remove and Install
3406E On-Highway Engine Crankshaft - Install
G3300 Engines Engine Oil and Filter - Change
G3300 Engines Engine Oil Sample - Obtain
3176C and 3196 Engines For Caterpillar Built Machines Accessory Drive - Install
3606 and 3608 Engines Camshaft
G3300 Engines Engine Oil Level - Check
3176C and 3196 Engines For Caterpillar Built Machines Accessory Drive - Remove
3406C (PEEC III) Truck Engine Electric Starting Motor
3608 Engine Governor Drive
3176C and 3196 Engines For Caterpillar Built Machines Gear Group (Front) - Install
3176C and 3196 Engines For Caterpillar Built Machines Gear Group (Front) - Remove
3306B Industrial Engine Service Meter - Remove and Install
3176C and 3196 Engines For Caterpillar Built Machines Valve Mechanism Cover Base - Remove and Install
3176C and 3196 Engines For Caterpillar Built Machines Rocker Shaft and Pushrod - Remove
3406E On-Highway Engine Flywheel - Install
3176C and 3196 Engines For Caterpillar Built Machines Rocker Shaft and Pushrod - Install
3306B Industrial Engine Tachometer Drive - Remove and Install
3176C and 3196 Engines For Caterpillar Built Machines Lifter Group - Remove and Install
3406E On-Highway Engine Crankshaft Rear Seal - Remove
3304B and 3306B Engines for Caterpillar Built Machines Vibration Damper and Pulley - Remove and Install
3406E and 3456 Engines for Caterpillar Built Machines Crankshaft Rear Seal - Install
3176C and 3196 Engines For Caterpillar Built Machines Water Outlet Manifold - Remove
3176C and 3196 Engines For Caterpillar Built Machines Water Outlet Manifold - Install