Pistons and Connecting Rods - Remove
Show/hide table
所需工具 | |||
---|---|---|---|
工具 | 零件号 | 零件描述 | 数量 |
A | 9S-9082 | 发动机盘车工具 | 1 |
开始:
- 拆卸缸盖。 请参阅拆解和组装, "缸盖 - 拆卸"。
- 拆卸发动机机油泵。 请参阅拆解和组装, "发动机机油泵 - 拆卸"。
- 卸下活塞冷却喷嘴。 请参阅拆解和组装, "活塞冷却喷嘴 - 拆卸和安装"。
Show/hide table
注意 |
---|
保持所有零件清洁无杂质。 杂质会造成快速磨损並縮短部件使用寿命。 |
- 从缸套内表面顶部开始清除积碳凸起。
- 使用工具 (A) 转动曲轴,直到两个活塞处于底部中心。
Show/hide table
图 1 g01032888 - 安装螺栓 (1) 和轴承盖。 推动连杆和活塞,直到活塞环处于缸套外。
注: 拆卸活塞和连杆时,当心不要损坏缸套和/或曲轴轴颈。
Show/hide table图 2 g01032895 - 从缸套上拆下活塞 (2) 和连杆。
- 重复步骤 1 至 4,以拆下其余的活塞和连杆。
Caterpillar Information System:
C-10 and C-12 Industrial Engines Fuel Pressure Sensor
3306B Industrial Engine Engine Oil Pressure Switch
3408E and 3412E Industrial Engines Fuel Temperature Sensor
3408E and 3412E Industrial Engines Coolant Temperature Sensor
3306B Industrial Engine Coolant Temperature Sender
3408E and 3412E Engines for Caterpillar Built Machines Speed/Timing Sensor
3408E and 3412E Engines for Caterpillar Built Machines Water Pump
3306B Industrial Engine Fuel System
3306B Industrial Engine Coolant Temperature Sender
3406E Truck Engine Basic Engine
3406C Engines for Caterpillar Built Machines Valve Rocker Arms, Lifters, and Bridges
3306B Industrial Engine Engine Oil Pressure Sender
3306B Industrial Engine Coolant Temperature Switch
3306B Industrial Engine Engine Oil Pressure Switch
3306B Industrial Engine Engine Oil Pressure Switch
3412E and C30 Engines Engine Oil Pan
3406E On-Highway Engine Pistons and Connecting Rods - Assemble
3408E and 3412E Engines for Caterpillar Built Machines Housing (Front)
3114, 3116 and 3126 MUI Engine Governors Governor Speed Circuit
3412C Engine Pistons and Connecting Rods - Install
3408E and 3412E Industrial Engines Gear Group (Front)
3306B Industrial Engine Engine Oil Pressure Switch
G3606 and G3608 Engines Reference Material
TK711, TK721, TK722 and TK732 Track Feller Bunchers Battery - Recycle