Transmission Clutch Seals May Fail on Certain 793F Off-Highway Trucks {3030, 3160} Caterpillar


Transmission Clutch Seals May Fail on Certain 793F Off-Highway Trucks {3030, 3160}

Usage:

793F D3T
Off-Highway Truck/Tractor
793F (S/N: SND1-UP; SSP162-UP; SXP1-UP; D3T167-UP)

Introduction

The problem that is identified below does not have a known permanent solution. Until a permanent solution is known, use the solution that is identified below.

Problem

Rotating seals in the transmission for clutches 1,2, or 3 may fail resulting in clutch leak or clutch failure on the machines listed above.

Solution

------ WARNING! ------

Do not operate or work on this product unless you have read and understood the instruction and warnings in the relevant Operation and Maintenance Manuals and relevant service literature. Failure to follow the instructions or heed the warnings could result in injury or death. Proper care is your responsibility.




Illustration 1g06425773
Typical view of transmission arrangement.
(A) 8E-3837 Seal Ring
(B) 8E-6853 Ring Carrier Assembly
(C) 8E-3839 Seal Ring

Caterpillar is aware of this problem but an interim repair has not been defined.

In the event of failure, replace the failed 8E-3837 Seal Ring (A), 8E-6853 Ring Carrier Assembly (B), and 8E-3839 Seal Ring (C) with same parts.

Caterpillar Information System:

Lock Plate in Transmission Planetary Group is Failing on Certain Large Off-Highway Trucks {3030, 3160} Lock Plate in Transmission Planetary Group is Failing on Certain Large Off-Highway Trucks {3030, 3160}
New Pre-Cleaner Hose Is Now Used on Certain 24 Motor Graders {7320} New Pre-Cleaner Hose Is Now Used on Certain 24 Motor Graders {7320}
Transmission Clutch Failure May Occur on Certain 793F Off-Highway Trucks {3030, 3160} Transmission Clutch Failure May Occur on Certain 793F Off-Highway Trucks {3030, 3160}
High-Pressure Fuel Pump Adapter and Front Gear Inspection for Certain C175–16 and C175–20 Engines {1242, 125H} High-Pressure Fuel Pump Adapter and Front Gear Inspection for Certain C175–16 and C175–20 Engines {1242, 125H}
Procedure to Replace Drive Assembly of Starter Motor On All Cat® Products {1453} Procedure to Replace Drive Assembly of Starter Motor On All Cat® Products {1453}
HFW221 Felling Head Specifications
Improved Axle Shaft is Now Used on Certain 826K Landfill Compactors {3278} Improved Axle Shaft is Now Used on Certain 826K Landfill Compactors {3278}
New Lamp Group Flood Lights Are Now Used on Certain L Series and M Series Medium Wheel Loaders {1429, 1430, 1434} New Lamp Group Flood Lights Are Now Used on Certain L Series and M Series Medium Wheel Loaders {1429, 1430, 1434}
New Air To Air After Cooler (ATAAC) Core Mount Is Now Used on Certain 815K Soil Compactors and 816K Landfill Compactors {1063} New Air To Air After Cooler (ATAAC) Core Mount Is Now Used on Certain 815K Soil Compactors and 816K Landfill Compactors {1063}
New Turbo Outlet Hose Is Now Used on Certain 815K Soil Compactors and 816K Landfill Compactors {1071} New Turbo Outlet Hose Is Now Used on Certain 815K Soil Compactors and 816K Landfill Compactors {1071}
Inspection of the Rear of the Engine on Certain C4.4 Machine Engines {1201} Inspection of the Rear of the Engine on Certain C4.4 Machine Engines {1201}
HFW221 Felling Head Maintenance Interval Schedule
Transmission Planet Gear Failure May Occur on Certain 797, 797B, and 797F Off-Highway Trucks {3030, 3160} Transmission Planet Gear Failure May Occur on Certain 797, 797B, and 797F Off-Highway Trucks {3030, 3160}
New Software Version Is Now Available for Cat® Terrain Office {7605, 7620} New Software Version Is Now Available for Cat® Terrain Office {7605, 7620}
Insufficient Bolt Clamp Load For The Scavenge Pump Used On Certain C175 Off-Highway Truck Engines {1312} Insufficient Bolt Clamp Load For The Scavenge Pump Used On Certain C175 Off-Highway Truck Engines {1312}
A New Strainer Group Has Been Added to Certain Vibratory Soil Compactors {4304} A New Strainer Group Has Been Added to Certain Vibratory Soil Compactors {4304}
A New Fuel Priming Pump Switch and Guard are Now Used on Certain 3512C and 3516C Machine Engines {1261, 1408, 7332} A New Fuel Priming Pump Switch and Guard are Now Used on Certain 3512C and 3516C Machine Engines {1261, 1408, 7332}
Improved Head to Block Joint on Certain C175 Reman Engines {1000} Improved Head to Block Joint on Certain C175 Reman Engines {1000}
Improved Center Chain Guards Are Now Used on Certain F Series Asphalt Pavers {6628, 7150} Improved Center Chain Guards Are Now Used on Certain F Series Asphalt Pavers {6628, 7150}
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Mixing Chamber
Procedure for Improving Battery Life is Now Available on Certain Generator Sets {1401} Procedure for Improving Battery Life is Now Available on Certain Generator Sets {1401}
New Cylinder Pack Components Are Now Used on Certain 3508B and 3512B Standard Stroke Machine Engines {1239} New Cylinder Pack Components Are Now Used on Certain 3508B and 3512B Standard Stroke Machine Engines {1239}
826K Landfill Compactor, 825K Soil Compactor and 824K Wheel Dozer Machine Systems Tilt and Tip Cylinder - Remove and Install
Planet Shaft Assemblies May Be Improperly Manufactured on Certain 797, 797B, and 797F Off-Highway Trucks {3030, 3160} Planet Shaft Assemblies May Be Improperly Manufactured on Certain 797, 797B, and 797F Off-Highway Trucks {3030, 3160}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.