Engine Oil Pump - Remove
Removal Procedure
Start By:
- Remove the engine oil pan. Refer to Disassembly and Assembly, "Engine Oil Pan - Remove and Install" .
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Bend back the locking tab and remove bolt (1) .
Show/hide table
The engine oil pump idler gear can fall off of the pump when the pump is removed or installed. Injury may result. To help prevent injury, always hold the idler gear on the pump when the pump is removed or installed. |
Show/hide table
Illustration 1 | g00465531 |
Show/hide table
Illustration 2 | g00489658 |
- Bend back two locking tabs (3) on the left hand side of the engine. Remove four bolts (2) and (4) and remove the engine oil pump and suction bell as a unit.
Caterpillar Information System:
3176C and 3196 Industrial Engines Turbocharger
3208 Marine Engine Engine Air Cleaner Element (Foam) - Clean/Replace
3406E, C-10, C-12, C-15, C-16 Truck Engines Model View Illustrations
3126E and 3126B Commercial and Truck Engines Caterpillar Driver Information Display
3126E and 3126B Commercial and Truck Engines Overhaul Considerations
Instructions for the Service Replacement of the Turbochargers{1052} Instructions for the Service Replacement of the Turbochargers{1052}
P16, P20, P25, P28, P40 and P60 Pulverizer Specifications
Installation Of The 129-6628 Speed/Timing Sensor On 3406E Engines{1907} Installation Of The 129-6628 Speed/Timing Sensor On 3406E Engines{1907}
3126E and 3126B Commercial and Truck Engines Engine Starting
3126E and 3126B Commercial and Truck Engines Mounting and Dismounting
P16, P20, P25, P28, P40 and P60 Pulverizer Walk-Around Inspection
P16, P20, P25, P28, P40 and P60 Pulverizer Principles of Breaking
3126 Truck Engine (Military) Before Starting Engine
G3606 and G3608 Engines Engine Design
3208 Marine Engine Belt - Inspect/Adjust/Replace
Installation Of The 161-7153 Harness Assembly On The 3126B Truck Engine{1408, 4466} Installation Of The 161-7153 Harness Assembly On The 3126B Truck Engine{1408, 4466}
3126 HEUI Industrial Engine Troubleshooting
3304B and 3306B Engines for Caterpillar Built Machines Cylinder Liner - Remove
3208 Marine Engine Engine Air Cleaner Element - Clean/Replace
G3612 and G3616 Engines Magneto
C-10 and C-12 Truck Engines Camshaft
P16, P20, P25, P28, P40 and P60 Pulverizer Crusher Tooth - Rebuild
P16, P20, P25, P28, P40 and P60 Pulverizer Crusher Tooth - Replace
G3606 and G3608 Engines Magneto Drive