Fuel Priming Pump and Fuel Filter Base - Remove and Install
Show/hide table
| NOTICE |
|---|
|
Ensure that all adjustments and repairs that are carried out to the fuel system are performed by authorized personnel that have the correct training. Before beginning ANY work on the fuel system, refer to Operation and Maintenance Manual, "General Hazard Information and High-Pressure Fuel Lines" for safety information. Refer to System Operation, Testing and Adjusting, "Cleanliness of Fuel System Components" for detailed information on the standards of cleanliness that must be observed during ALL work on the fuel system. |
- Turn the battery disconnect switch to the OFF position.
- Drain the fuel system water separator. Refer to Operation and Maintenance Manual, "Fuel System Water Separator - Drain" for the correct draining procedure.
Show/hide table
Illustration 1 g06295298 - Disconnect hose assemblies (3) and harness assembly (4).
- Remove three bolts (1) and fuel priming pump and filter base (2).
- Install the fuel priming pump and filter base (2) in the reverse order of removal.
Caterpillar Information System:
777G Off-Highway Truck Power Train Transmission, Transfer Gears, and Differential - Install
High-Pressure Fuel Line Leaks on Certain Tier 4 Engines {1250, 1252} High-Pressure Fuel Line Leaks on Certain Tier 4 Engines {1250, 1252}
24 Motor Grader Cooling System Water Temperature Regulator - Replace
559D and 579D Knuckleboom Loader Machine Systems Manifold Valve (Bypass) - Assemble
24 Motor Grader Engine Components - Clean/Inspect, Rebuild/Install Reman, Install New - Every 1,059,915 L (280,000 US gal) of Fuel
24 Motor Grader Engine Components - Clean/Inspect, Rebuild/Install Reman, Install New - Every 529,958 L (140,000 US gal) of Fuel
777G Off-Highway Truck Power Train Transmission, Transfer Gears, and Differential - Remove
Servicing the Suspension Cylinders for 794 AC Off-Highway Trucks {0599, 0756, 7200, 7201, 7213} Servicing the Suspension Cylinders for 794 AC Off-Highway Trucks {0599, 0756, 7200, 7201, 7213}
CB13, CB15, and CB16 Vibratory Asphalt Compactor Engine Supplement Electric Starting Motor - Remove and Install
16M Series 3 and 18M Series 3 Motor Graders Fire Suppression System Shutdown and Isolation
CB13, CB15, and CB16 Vibratory Asphalt Compactor Engine Supplement Belt Tensioner - Remove and Install
New Wear Sleeve Seals Are Now Used for Alternator and Auxillary Drive Pulleys on Certain Cat® Machine Engines {1154, 1405, 1802} New Wear Sleeve Seals Are Now Used for Alternator and Auxillary Drive Pulleys on Certain Cat® Machine Engines {1154, 1405, 1802}
CB13, CB15, and CB16 Vibratory Asphalt Compactor Engine Supplement Fuel Filter (Secondary) and Fuel Filter Base - Remove and Install
CB13, CB15, and CB16 Vibratory Asphalt Compactor Engine Supplement Expansion Tank - Remove and Install
A New Hose Assembly and Tube Assembly are Now Available for the Service Brake Control Group on Certain 777G Off-Highway Trucks {4257, 4264, 4265, 4269} A New Hose Assembly and Tube Assembly are Now Available for the Service Brake Control Group on Certain 777G Off-Highway Trucks {4257, 4264, 4265, 4269}
C27 Engines for Motorgraders Exhaust Balance Valve - Test
Installation Procedure for the Elite Product LinkTM PLE602P and PLE642P Systems {7606} Installation Procedure for the Elite Product LinkTM PLE602P and PLE642P Systems {7606}
CB13, CB15, and CB16 Vibratory Asphalt Compactor Engine Supplement Muffler - Remove and Install
CB13, CB15, and CB16 Vibratory Asphalt Compactor Engine Supplement Pump Drive - Remove and Install
CB13, CB15, and CB16 Vibratory Asphalt Compactor Engine Supplement Radiator, Hydraulic Oil Cooler, Air Cooler, and Fuel Cooler - Remove and Install
559D and 579D Knuckleboom Loader Machine Systems Main Control Valve - Remove and Install
785G Off-Highway Truck Power Train Transfer Gears - Assemble
Bench Test Procedure for Hydraulic Piston Pumps {0784, 5070} Bench Test Procedure for Hydraulic Piston Pumps {0784, 5070}
559D & 579D Knuckleboom Loader Engine Supplement Pump Drive - Remove and Install