Hydraulic Tank - Assemble
- Install screen (26). Install plate (27) and nut. Tighten nut (27) to a torque of
20 ± 5 N·m (177 ± 44 lb in) . Repeat for the second screen.Show/hide tableIllustration 2 g06265604 Show/hide tableImproper assembly of parts that are spring loaded can cause bodily injury.
To prevent possible injury, follow the established assembly procedure and wear protective equipment.
- Install spring guide (18) and spring (19). Install valve (20). Install seal (21). Install valve body (22).
- Install seal (23) and plug (24). Install the washers and nuts (25).
Show/hide table
Illustration 3 g06265561 Show/hide tableIllustration 4 g06265399 - Install O-ring seals (17). Install sight glass (16) into grommet (15). Install indicator plate (14). Install grommet (15). Install retainer (13) on cover (10). Install bolts (12).
Show/hide table
Illustration 5 g06265386 - Install new gasket (11).
- Install cover (10), washers (9), and bolts (8).
Show/hide table
Illustration 6 g06265364 - Install strainer (7). Install cap assembly (6).
Show/hide table
Illustration 7 g06263321 - Install accumulator (3) and accumulator (2).
- Install two spacers, clamp assembly (4), the washer, and bolt (5).
- Install the washers and bolts (1).
Show/hide table
Illustration 1 | g06265653 |
End By:
- Install the hydraulic tank.
Caterpillar Information System:
A New Drive Motor Bearing Kit Is Available for Certain Skid Steer Loaders {4351, 5058} A New Drive Motor Bearing Kit Is Available for Certain Skid Steer Loaders {4351, 5058}
785G Off-Highway Truck Machines Systems Lubrication Pump (Automatic) - Remove and Install
New Software Is Now Used on Certain C-Series Telehandlers {7610, 7620} New Software Is Now Used on Certain C-Series Telehandlers {7610, 7620}
PM820, PM822, and PM825 Cold Planer Engine Supplement Fuel Filter Base (Secondary) - Remove and Install
SE50 VT Asphalt Screed Screed Control - Disassemble
SE50 VT Asphalt Screed Platform - Remove and Install
SE50 VT Asphalt Screed Screed Control - Remove and Install
Cat® Detect Object Detection Hardware Generation 4 for Small Off Highway Trucks, Motor Graders, Large Wheel Loaders, Large Wheel Dozers and Articulated Trucks Product Identification
Cat® Detect Object Detection Hardware Generation 4 for Small Off Highway Trucks, Motor Graders, Large Wheel Loaders, Large Wheel Dozers and Articulated Trucks Declaration of Conformity
MP318, MP324, MP332, MP345 and and MP365 Multi-Processors and Jaws Host Machine Pressure and Flow - Test
MP318, MP324, MP332, MP345 and and MP365 Multi-Processors and Jaws Swivel Leakage - Test
MP318, MP324, MP332, MP345 and and MP365 Multi-Processors and Jaws Gerotor Motor Leakage - Test
PM820, PM822, and PM825 Cold Planer Engine Supplement Fumes Disposal Filter - Remove and Install
Updated Machine System and Grade Control Software and A New Water Spray Valve Group Are Now Used on Certain PM620 and PM622 Cold Planers {5051} Updated Machine System and Grade Control Software and A New Water Spray Valve Group Are Now Used on Certain PM620 and PM622 Cold Planers {5051}
SE50 VT Asphalt Screed Screed Control - Assemble
New Wiring Harness for Screed Control Pendant Is Now Used on Certain Asphalt Screeds {5639, 7451} New Wiring Harness for Screed Control Pendant Is Now Used on Certain Asphalt Screeds {5639, 7451}
New Tow Arms are Now Used On Certain Asphalt Pavers {7121} New Tow Arms are Now Used On Certain Asphalt Pavers {7121}
New LADAR Harness Assembly now Available for Certain R1600G Load Haul Dump Machines {1408, 1439} New LADAR Harness Assembly now Available for Certain R1600G Load Haul Dump Machines {1408, 1439}
Tope May Stop Responding During Camera Switching on Color Multi-Purpose Display (CMPD) {7605} Tope May Stop Responding During Camera Switching on Color Multi-Purpose Display (CMPD) {7605}
986K Wheel Loader Engine Supplement Primary Fuel Filter, Water Separator and Base - Remove and Install
PM820, PM822, and PM825 Cold Planer Machine Systems Piston Pump (Hydraulic Fan) - Remove and Install
986K Wheel Loader Engine Supplement Engine Oil Filter and Oil Filter Base - Remove and Install
Sealant is Now Used for Alternator and Auxillary Drive Pulleys on Certain Cat® Machine Engines {1154, 1207, 1358, 1405, 1425} Sealant is Now Used for Alternator and Auxillary Drive Pulleys on Certain Cat® Machine Engines {1154, 1207, 1358, 1405, 1425}
SE50 VT Asphalt Screed Screed Plate (Main) - Remove and Install