Camshaft
Show/hide table
Illustration 1 | g01436825 |
(3) Key
(4) Gear |
(1) Torque for thrust pin ...
(2) Diameter of new camshaft journals ...
Show/hide table
Illustration 2 | g01436826 |
(A) Camshaft lobe lift
(B) Camshaft lobe height (C) Base circle |
(A) Camshaft lobe lift
Specified camshaft lobe lift (A)
- Exhaust lobe ...
9.550 mm (.3760 inch) - Inlet lobe ...
11.371 mm (.4477 inch) - Injector lobe ...
11.275 mm (.4439 inch) - Inlet lobe ...
Specified base circle (C)
- Exhaust lobe ...
55.0 ± 0.4 mm (2.17 ± .02 inch) - Inlet lobe ...
51.0 ± 0.4 mm (2.01 ± .02 inch) - Injector lobe ...
51.0 ± .4 mm (2.01 ± .02 inch) - Inlet lobe ...
To find the lobe lift, use the procedure that follows:
- Measure the camshaft lobe height (B).
- Measure the base circle (C).
- Subtract the base circle that is found in Step 2 from the lobe height that is found in Step 1. The difference is the actual camshaft lobe lift (A).
Maximum permissible difference between actual lobe lift and the specified lobe lift of a new camshaft ...
Caterpillar Information System:
C-10 and C-12 Truck Engines Camshaft
3500B Locomotive Engines Cold Weather Starting
C-10 and C-12 Truck Engines Exhaust Manifold
3034 Engine for Caterpillar Built Machines Fuel System
Tool and Specification Chart for Inverted Duo-Cone Seals {0599, 7561} Tool and Specification Chart for Inverted Duo-Cone Seals {0599, 7561}
C175-16 Locomotive Engines Before Starting Engine
3176C and 3196 Industrial Engines Exhaust Manifold
Assembly and Installation of Inverted Duo-Cone Seals{7561} Assembly and Installation of Inverted Duo-Cone Seals{7561}
3176C and 3196 Engines for Caterpillar Built Machines Cylinder Head
3176C and 3196 Industrial Engines Cylinder Head Valves
Air Conditioning and Heating R134a for All Caterpillar Machines Refrigerant System - Evacuate
Air Conditioning and Heating R134a for All Caterpillar Machines Refrigerant System - Charge
3500B Locomotive Engines Starting the Engine
3176C and 3196 Engines for Caterpillar Built Machines Engine Oil Pressure
3500 and 3500B Engines Starting with Jump Start Cables
3612 and 3616 Fast Vessel Engines Engine Operation
3406E and 3456 Industrial Engines Flywheel
3176C and 3196 Industrial Engines Engine Oil Pan
3406E and 3456 Industrial Engines Gear Group (Rear)
3176C and 3196 Industrial Engines Engine Oil Pan
3176C and 3196 Industrial Engines Water Temperature Regulator
3406E and 3456 Industrial Engines Alternator
3116 Truck Engines Belt Tensioner
C-10 and C-12 Truck Engines Belt Tensioner