Housing (Front)
Show/hide table
Illustration 1 | g00753583 |
Front housing and front cover |
Show/hide table
Illustration 2 | g00753612 |
9U-6200 Front Cover Installer |
(1) Front cover
The front cover must be centered on the front of the engine before the bolts are tightened. Use a 9U-6200 Front Cover Installer to center the front cover before the bolts are tightened.
(2) Front housing
- Tighten the M8 bolts (not shown) that fasten the front housing to the cylinder block to the following torque: ...
22 N·m (16 lb ft)
- Tighten the M10 bolts (not shown) that fasten the front housing to the cylinder block to the following torque: ...
44 N·m (33 lb ft)
(3) Bolts
- After the front cover is centered on the front of the engine, tighten the bolts and the two nuts that fasten the front cover to the front housing. Tighten the bolts and the nuts to the following torque: ...
22 N·m (16 lb ft)
(4) 9U-6200 Front Cover Installer
The front cover installer is used to center the front cover on the front of the engine. Refer to the Disassembly and Assembly Module, "Front Cover - Install" topic for additional information.
Caterpillar Information System:
G3606 and G3608 Engines Safety Messages
3500B and 3500B High Displacement Generator Set Engines Turbocharger
3126B Industrial Engine Refrigerant Compressor
3500B and 3500B High Displacement Generator Set Engines Turbocharger
3500B Engines for Caterpillar Built Power Modules Turbocharger
3054 Engine Gear Group (Front)
G3606 and G3608 Engines Model View Illustrations
3054 Engine Camshaft
G3612 and G3616 Engines Engine Operation
C-9 Engines for Caterpillar Built Machines Speed/Timing Sensor
3406E Truck Engines Basic Block
3500 Generator Set Engines Alternator and Regulator
G3606 and G3608 Engines Aftercooler Condensation - Drain
3512 and 3516 EUI Engines and 784B, 785B, 789B and 793B Off-Highway Truck/Tractors Piston and Rings - Two-Piece Piston
3500 Generator Set Engines Engine Design
G3500 Engines Cylinder Pressure - Measure/Record
3500B Engines for Caterpillar Built Power Modules Exhaust Manifold
3500B Engines for Caterpillar Built Power Modules Exhaust Manifold
3054 Engine Cylinder Block
3054 Engine Crankshaft
3500 Generator Set Engines Engine Design
3500 Generator Set Engines Engine Design
3500B and 3500B High Displacement Generator Set Engines Air Inlet and Exhaust Lines
G3612 and G3616 Engines Engine Mounts - Check