Automatic Truck Identification
When the Automatic Truck ID feature is enabled, a list of available trucks is displayed when the Store button is pressed.
When this feature is disabled, the truck selection list can be manually accessed with:
- The "Truck List" button/icon on the main payload screen
Note: The truck that is selected with Auto Truck ID is the next truck that will be loaded.
Show/hide table
Illustration 1 | g06127462 |
Truck List screen |
Perform an Auto Truck ID Configuration to enable or disable the Automatic Truck ID.
Path: Service > Configurations > Payload > Auto Truck ID
- Press the "Service" button on the right side of the display.
The "Service" page will appear.
- Press "Configurations".
"Configurations" highlight in blue and the "Configurations" menu list will appear.
- Press "Payload".
"Payload" will highlight in blue and the "Payload" menu list will appear.
Show/hide tableIllustration 2 g06004345 Payload > Auto Truck ID screen - Press "Auto Truck ID".
"Auto Truck ID" will highlight in blue and the "Auto Truck ID" settings page will appear.
- Press "Enabled" or "Disabled".
- Press "OK" to set.
- Press the Back button to return to the previous menu.
Caterpillar Information System:
A New Message Display is Now Used on Certain M Series 3 Motor Graders {7490} A New Message Display is Now Used on Certain M Series 3 Motor Graders {7490}
New Software is Now Available for all Cat® Object Detection and Vision Applications on Certain Cat® Products {7610, 7620} New Software is Now Available for all Cat® Object Detection and Vision Applications on Certain Cat® Products {7610, 7620}
M314F, M316F, M318F, M320F, M322F, MH3022, MH3024 and MH3026 Wheeled Excavator Engine Supplement Oil Pan - Remove and Install
New Product Link and VIMS 3G Software for 523, A4:N4 And Standalone VIMS Modules Is Now Available for Certain Series G Small Off-Highway Trucks {7606, 7610, 7620} New Product Link and VIMS 3G Software for 523, A4:N4 And Standalone VIMS Modules Is Now Available for Certain Series G Small Off-Highway Trucks {7606, 7610, 7620}
CW16 Pneumatic Compactor Capacities (Refill)
CW16 Pneumatic Compactor Capacities (Refill)
AP300F Asphalt Paver Machine System Solenoid Valve (Vibratory Motor) - Calibrate
M314F, M316F, M318F, M320F and M322F Wheeled Excavator and Material Handler Machine Systems System Pressure - Release
M315D, M315D Series 2, M315D2, M317D Series 2 and M317D2 Wheeled Excavators Power Train Differential - Assemble - Rear
CW16 Pneumatic Compactor Access Doors and Covers
New Hose Assemblies are Now Used in the Brake Control Group on Certain 789D Off-Highway Trucks {4257, 4258, 4263, 4264, 4265, 4269, 4280} New Hose Assemblies are Now Used in the Brake Control Group on Certain 789D Off-Highway Trucks {4257, 4258, 4263, 4264, 4265, 4269, 4280}
AP300F Asphalt Paver Machine System Solenoid Valve (Tamper) - Calibrate
M314F, M316F, M318F, M320F, M322F, MH3022, MH3024 and MH3026 Wheeled Excavator Engine Supplement Engine Oil Filter and Oil Filter Base - Remove and Install
CW16 Compactor Machine System Spray Bar
CW16 Compactor Machine System Water Spray Lines
CW16 Compactor Machine System Water Tank
CW16 Compactor Machine System Tire Skirt
Medium L and M Series Wheel Loaders Cat Production Measurement Application on Machines Equipped with Product Link: PLE631 or PLE641 Automatic Material Identification
M314F, M316F, M318F, M320F, M322F, MH3022, MH3024 and MH3026 Wheeled Excavator Engine Supplement Fuel Transfer Pump - Remove and Install
Possible Defect With the Electric Swivel Group on Certain Wheel Excavators {1408, 7553} Possible Defect With the Electric Swivel Group on Certain Wheel Excavators {1408, 7553}
MH3037 Material Handler Machine Systems Hydraulic System Pressure - Test and Adjust
CW16 Pneumatic Compactor Backup Alarm - Test
AP600F Asphalt Paver Propel System Piston Motor (Front Wheel Assist)
CW16 Pneumatic Compactor Ballast - Remove/Install