Torque Specifications Caterpillar


Tie Rods

Usage:

SR4BHV ADT
应按照下表中的扭矩技术规格拧紧用于确定连杆组件方位的锁紧螺母。


图 1g03876778

表 1
横拉杆 
螺纹尺寸(公制)  螺纹尺寸
In 
动态扭矩值
这些值适用于锻造管组件上的防松螺母。 
M5  10 号(.190)  4.5 ± 1 N·m (40 ± 9 lb in) 
M6  1/4  6 ± 1 N·m (53 ± 9 lb in) 
M8  5/16  7 ± 1 N·m (62 ± 9 lb in) 
M10  3/8  10 ± 2 N·m (88.5 ± 17.7 lb in) 
7/16  17 ± 3.4 N·m (150.5 ± 30.1 lb in) 
M12  1/2  20 ± 4 N·m (177 ± 35 lb in) 
M14  9/16  25 ± 5 N·m (221 ± 44 lb in) 
M16  5/8  25 ± 5 N·m (221 ± 44 lb in) 
M18  11/16  35 ± 7 N·m (25.8 ± 5.2 lb ft) 
  3/4  35 ± 7 N·m (25.8 ± 5.2 lb ft) 
M20  13/16  40 ± 8 N·m (29.5 ± 5.9 lb ft) 
M22  7/8  45 ± 9 N·m (33.2 ± 6.6 lb ft) 
M24  60 ± 12 N·m (44.3 ± 8.9 lb ft) 
M27  1 1/16  40 ± 14 N·m (29.5 ± 10.3 lb ft) 
M30  1 3/16  80 ± 16 N·m (59.0 ± 11.8 lb ft) 
M33  1 5/16  110 ± 22 N·m (81.1 ± 16.2 lb ft) 
M36  1-7/16  120 ± 24 N·m (88.5 ± 17.7 lb ft) 
M40  1 5/8  140 ± 28 N·m (103.3 ± 20.7 lb ft) 
M42  1-11/16  160 ± 32 N·m (118.0 ± 23.6 lb ft) 
M48  1 7/8  180 ± 36 N·m (132.8 ± 26.6 lb ft) 
M50  200 ± 40 N·m (147.5 ± 29.5 lb ft) 
M64  2 1/2  220 ± 44 N·m (162.3 ± 32.5 lb ft) 

Caterpillar Information System:

AP555F Asphalt Paver Engine Oil and Filter - Change
Onboard Software Version 5.x Cables and Connectors - Check
AP555F Asphalt Paver Engine Oil and Filter - Change
24 Motor Grader Transmission Oil Level - Check
Onboard Software Version 5.x Backup Battery - Test
Onboard Software Version 5.x Antenna - Check/Clean
Onboard Software Version 5.x Operator Utilities for Fuel Truck
773E Off-Highway Truck Cab Air Filter - Clean/Replace
469-7606 Brake Hub Lifting Device{0374, 0599, 0629, 0632, 0700, 0727, 0730, 0731, 4008, 4251, 4267} 469-7606 Brake Hub Lifting Device{0374, 0599, 0629, 0632, 0700, 0727, 0730, 0731, 4008, 4251, 4267}
AP500F Asphalt Paver Engine Oil and Filter - Change
CCS7 Combination Vibratory Compactors Engine Supplement Electronic Control (Diesel Exhaust Fluid) - Remove and Install
24 Motor Grader Rollover Protective Structure (ROPS) - Inspect
AP500F Asphalt Paver Engine Oil and Filter - Change
Onboard Software Version 5.x Maintenance Interval Schedule
Torque Specifications Cable
PL72 Pipelayers Power Train Drive Shaft (Pump Coupling) - Remove and Install
Installation Guide for Cat® Terrain for Drilling on a D65 Articulated I/O Drill {7490, 7605} Installation Guide for Cat® Terrain for Drilling on a D65 Articulated I/O Drill {7490, 7605}
PL83 and PL87 Pipelayer Systems Calibration
2015/09/11 New Mounting Hardware for the Electric Retarder Is Now Available for Certain 795F Series AC Off-Highway Trucks {1437, 1627, 3121, 425R}
Onboard Software Version 5.x Camera - Clean
PL83 and PL87 Pipelayer Systems Calibration Error Codes
Onboard Software Version 5.x Components - Check
A New Track Roller with Larger Shaft and Bearings for Certain PL72 Pipelayers {4180} A New Track Roller with Larger Shaft and Bearings for Certain PL72 Pipelayers {4180}
Onboard Software Version 5.x Display - Clean
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.