Counterweight - Remove and Install
Show/hide table
Required Tools | |||
Tool | Part Number | Part Description | Qty |
A | 189-0863 | Shackle As | 2 |
- Park the machine on a flat, level surface. Rotate the upper frame 90 degrees from the undercarriage frame.
Show/hide table
Illustration 1 g03863381 - Cut cable straps (1) and disconnect harness assembly (2).
Show/hide table
Illustration 2 g03863391 - Cut cable strap (3) and disconnect harness assembly (4).
Show/hide table
Illustration 3 g03863420 Show/hide tableIllustration 4 g03863421 - Remove screws (5). Reposition signal lamp group (6).
- Disconnect harness assembly (7). Remove signal lamp group (6).
- Repeat Steps 4 and 5 for the signal lamp group on the opposite side.
Show/hide table
Illustration 5 g03863440 Show/hide tableIllustration 6 g03863442 - Attach Tooling (A) and a suitable lifting device to remove counterweight (8). The weight of counterweight (8) is approximately
4173 kg (9200 lb) . - Remove bolts (9) and counterweight (8).
- Install counterweight (8) in the reverse order of removal.
Caterpillar Information System:
PL72 Pipelayers Power Train Main Drive Shaft - Remove and Install
M314F, M316F, M318F, M320F and M322F Wheeled Excavator and Material Handler Machine Systems Gear Motor (Fan Drive) - Remove and Install
CP44B and CS44B Vibratory Soil Compactors Machine Systems Leveling Blade - Remove and Install
MSS3s Machine Security System Connector Contact Description
MSS3s Machine Security System Machine Preparation for Troubleshooting
MSS3s Machine Security System Connector Locations
M314F, M316F, M318F, M320F, M322F, MH3022, MH3024 and MH3026 Wheeled Excavator Engine Supplement Fan - Remove and Install
MSS3s Machine Security System Wiring Harness (Short Circuit) - Test
MSS3s Machine Security System Wiring Harness (Open Circuit) - Test
CP44B and CS44B Vibratory Soil Compactors Machine Systems Hydraulic Cylinder (Leveling Blade) - Remove and Install
MSS3s Machine Security System Software - Uninstall - "Immobilizer" Feature
MD6200 Rotary Drill Drill Bit - Remove and Install
740 GC, 740 Ejector, 745 Articulated Truck Power Train Center Axle - Remove and Install
PL72 Pipelayers Machine Systems Ladder - Remove and Install
CCS7 Combination Vibratory Compactors Machine Systems Control Valve (Shift) - Remove and Install
794 AC Off-Highway Truck Field Assembly Air Conditioner Lines - Install
AP500F Asphalt Paver Propel System Piston Pump Neutral - Test and Adjust - Left Propel
PL72 Pipelayers Machine Systems Fairlead Sheave - Remove and Install
Improved Air Line Hose Is Now Used on Certain 988K, 834K, and 836K {1063, 1071} Improved Air Line Hose Is Now Used on Certain 988K, 834K, and 836K {1063, 1071}
794 AC Off-Highway Truck Field Assembly Lighting - Install
777D and 777E Off-Highway Truck Hydraulic System Hoist Cylinder Mounting
777E and 777F Off-Highway Truck Power Train Oil Filter (Transmission Charging)
777E and 777F Off-Highway Truck Power Train Bypass Switch (Transmission Charging Oil Filter)
777E and 777F Off-Highway Truck Power Train Relief Valve (Pilot Control Pressure)