® Onboard 5.3 Configuration Guide Caterpillar

The monitor display group is provided to the customer site with Fleet onboard installed. Once the hardware components are installed on a machine and the monitor display group is turned on for the first time, the application will display an initial configuration.

Illustration 1	g02139451
"Initial Configuration..." in the "Options" menu

Illustration 2	g06418595
"Display & MineStar Initial Configuration" screen

The "Display & MineStar Initial Configuration" screen may be displayed from the "Options" menu by selecting "Initial Configuration..." to modify information for the network. Also, the screen may be accessed for troubleshooting purposes. The configuration screen provides a graphical interface to enter information for the network for the monitor display group and the office. Refer to Illustration 1.

Illustration 3	g02139453
Disabled message

Note: The "$ Enable Initial Configuration" key must be present in the "TopeConfig.txt" configuration file to access the initial configuration. If this key is absent, then the initial configuration screen is disabled. An "Error" message will appear to indicate that the function is disabled. Refer to Illustration 2.