Tire and Rim (Front) - Remove and Install
Show/hide table
| Required Tools | |||
|---|---|---|---|
| Tool | Part Number | Part Description | Qty |
| A | 422-2352 | Jack Stand Gp | 2 |
| B | 444-0526 | Air/Hydraulic Jack Gp | 1 |
- Raise the bucket. Install cylinder lock (1).
Show/hide table
Illustration 2 g02901645 - Remove nuts (3) and fender (2). Place suitable cribbing (4) between the front axle and the frame on each side of the machine. This action will keep the front axle from oscillating.
Show/hide table
Illustration 3 g01116902 - Loosen lug nuts (5). Do not remove lug nuts (5) at this time.
Show/hide table
Illustration 4 g03104758 - Use Tooling (B) to raise the machine. Position Tooling (A) under the frame of the machine. Use Tooling (B) to lower the machine onto Tooling (A).
Show/hide table
Illustration 5 g03104759 - Attach a suitable lifting device to tire and rim (6). The combined weight of tire and rim (6) is approximately
70 kg (155 lb) . Remove lug nuts (5). Remove tire and rim (6).
Show/hide table
| |
| Illustration 1 | g02901639 |
- Install tire and rim (6) in the reverse order of removal.
- Apply one drop of light oil to the threads of lug nuts (5).
- Tighten lug nuts (5) to a torque of
190 ± 10 N·m (140 ± 7 lb ft) . Turn lug nuts (5) an additional 60 degrees ± 5 degrees.
Caterpillar Information System:
816K Landfill Compactor and 815K Soil Compactor Systems Sensor Supply - Test
422F2, 427F2, 428F2, 432F2, 434F2 and 444F2 Backhoe Loaders Machine Systems System Pressure - Release
AP255E Asphalt Paver Machine Systems Piston Motor (Propel) - Remove and Install
2015/07/27 The Hoist Cylinder Group May Require a Break In Period for Certain 793D, 793F, and 797F Off-Highway Trucks {5102}
PL83 and PL87 Pipelayer Systems Track Carrier Roller
422F2, 427F2, 428F2, 432F2, 434F2 and 444F2 Backhoe Loaders Machine Systems Counterweight - Remove and Install
415F2, 416F2, 420F2 IT, 420F2 ST, 430F2 IT and 430F2 ST Backhoe Loaders Machine Systems Fuel Tank - Remove and Install
2015/06/02 Cover Assembly and Valve Vacuator Is Now Available as Spare Parts For The Ap300 Asphalt Paver {1051}
AP355F Asphalt Paver Backup Alarm
AP300F Asphalt Paver Battery Disconnect Switch
2015/08/04 Improved Cold-Weather Capability for Engines on 236D, 242D, 257D, 259D, 246D, 262D, 277D, 279D, 287D, and 289D Skid Steer Loader, Multi-Terrain Loader, and Compact Track Loader Machines {1074, 1317, 664E, 7620}
Registering Diesel Particulate Filter (DPF), Diesel Oxidation Catalyst (DOC), Fuel Injector and Diesel Exhaust Fluid (DEF) Injector Serial Numbers, Fuel Injection Timing Correction on C2.4, C3.3B, and C3.8 Machine Engines {108F, 1091} Registering Diesel Particulate Filter (DPF), Diesel Oxidation Catalyst (DOC), Fuel Injector and Diesel Exhaust Fluid (DEF) Injector Serial Numbers, Fuel Injection Timing Correction on C2.4, C3.3B, and C3.8 Machine Engines {108F, 1091}
Reuse & Salvage Procedure for Off-Highway Truck Accumulators {0374, 0599, 0679, 0738, 4269, 4331, 5077} Reuse & Salvage Procedure for Off-Highway Truck Accumulators {0374, 0599, 0679, 0738, 4269, 4331, 5077}
M314F, M316F, M318F, M320F, M322F, MH3022, MH3024 and MH3026 Wheeled Excavator Engine Supplement Alternator - Remove and Install
AP355F Asphalt Paver Decelerator Control
330D, 336D, 336D2, 340D and 340D2 Excavators Machine System Specifications Check Valve
SE34 V and SE34 VT Asphalt Screeds Screed Service Locks
M314F, M316F, M318F, M320F, M322F, MH3022, MH3024 and MH3026 Wheeled Excavator Engine Supplement Refrigerant Compressor - Remove and Install
AP300F Asphalt Paver Hopper Travel Lock
422F2, 427F2, 428F2, 432F2, 434F2 and 444F2 Backhoe Loaders Powertrain Tie Rod (Steering)(Front) - Remove and Install
AP300F Asphalt Paver Engine Starting
AP255E Asphalt Paver Engine Supplement Gear Pump (Fan Drive) - Remove
422F2, 427F2, 428F2, 432F2, 434F2 and 444F2 Backhoe Loaders Powertrain Steering Cylinder (Front) - Remove and Install
AP255E Asphalt Paver Engine Supplement Exhaust (Muffler) - Remove and Install