Wiring (Payload Sensor)
Show/hide table
图 1 | g03784458 |
典型示例 |
Show/hide table
439-1130 有效负载传感器导线总成 和 454-9856 有效负载传感器导线总成 的技术规格     | |||
---|---|---|---|
项目     | 数量     | 零件     | 技术规格说明     |
1     | 4     | 436-1463 有效负载传感器总成     | 安装扭矩为 55 ± 10 N·m (41 ± 7 lb ft)。     |
2     | 2     | 8T-4137 螺栓     | 安装扭矩为 30 ± 5 N·m (266 ± 44 lb in)。     |
Caterpillar Information System:
730,735 and 730 EJECTOR Articulated Truck Systems Speed Sensor (Wheel)
735C, 745C and 740C EJECTOR Articulated Truck Systems Rear View Mirror
735C, 745C and 740C EJECTOR Articulated Truck Systems Breather (Power Train)
735C, 745C and 740C EJECTOR Articulated Truck Systems Solenoid Valve (Brake Accumulator Charge)
SE50 VT Asphalt Screed Solenoid Valve (Height, End Gate) - Remove and Install
SE50 VT Asphalt Screed Gerotor Motor (Screed Height) - Remove and Install
SE50 VT Asphalt Screed Walkway - Remove and Install
SE50 VT Asphalt Screed Transverse Beam - Remove and Install
SE50 VT Asphalt Screed Thickness Control - Remove and Install
SE50 VT Asphalt Screed Temperature Sensor (Screed) - Remove and Install
SE50 VT Asphalt Screed Thickness Control - Disassemble
SE50 VT Asphalt Screed Tamper Bar - Disassemble
735C, 745C and 740C EJECTOR Articulated Truck Systems Shuttle Valve
735C, 745C and 740C EJECTOR Articulated Truck Systems Wiring (Payload)
C7.1 Engines Aftertreatment Identification Module - Test
C2.2 Engines for Caterpillar Built Machines Piston and Rings
735C, 745C and 740C EJECTOR Articulated Truck Systems Shuttle Valve
C7.1 Engines CAN Data Link - Test
735C, 745C and 740C EJECTOR Articulated Truck Systems Rear View Mirror
C2.2 Engines for Caterpillar Built Machines Connecting Rod
C2.2 Engines for Caterpillar Built Machines Cylinder Head
735C, 745C and 740C EJECTOR Articulated Truck Systems Check Valve
M318F, M320F and M322F Wheeled Excavators and MH3022, MH3024 and MH3026 Material Handlers Lifting Capacities - MH3024 - Standard Undercarriage and Material Handler Undercarriage
735C, 745C and 740C EJECTOR Articulated Truck Systems Steering Control