Leveling Blade - Remove and Install
Start By:
- Remove the hydraulic cylinder for the leveling blade. Refer to Disassembly and Assembly, "Hydraulic Cylinder (Leveling Blade) - Remove and Install".
Show/hide table
Personal injury or death can result from not engaging the parking brake. Transmission engagement alone will not prevent machine from rolling when the engine is stopped. |
- Remove three bolts (3), the three washers, plate assembly (1), and support (2).
- Remove the four bolts, the eight washers, the four nuts, and plate (4).
Show/hide table
Illustration 2 g03743824 - Attach a suitable lifting device to blade assembly (5). The weight of blade assembly (5) is approximately
290 kg (640 lb) .Show/hide tableIllustration 3 g03743841 - Remove bolt (6), the washer, the two shims, and the nut.
Show/hide table
Illustration 4 g03743870 Note: Record the position of the shim and the thickness of the shim on each arm for installation purposes.
- Remove pin (8) and shim (7) from each blade arm of blade assembly (5).
Show/hide table
Illustration 5 g03743871 - Remove aligning bearing (9) from each blade arm of blade assembly (5).
- Remove blade assembly (5).
Show/hide table
Illustration 1 | g03743844 |
- Install blade assembly (5) in the reverse order of removal.
End By:
- Install the hydraulic cylinder for the leveling blade. Refer to Disassembly and Assembly, "Hydraulic Cylinder (Leveling Blade) - Remove and Install".
Caterpillar Information System:
CP34 and CS34 Vibratory Soil Compactors Machine Systems Metering Pump (Steering) - Remove and Install
CP34 and CS34 Vibratory Soil Compactors Machine Systems Fuel Tank - Remove and Install
RM500B Reclaimer Mixer Machine Systems Hydraulic Oil Cooler Lines Group
793F Off-Highway Truck Fuel Correction Factor - Set
735C and 745C Articulated Trucks Machine Systems Transfer Gear Lubrication System
2014/11/14 New EMCP 3.2/3.3 Software Is Now Available For Use On Certain Cat® Products {4490, 7620}
735C and 745C Articulated Trucks Machine Systems Torque Converter
RM500B Reclaimer Mixer Machine Systems Hydraulic Oil Cooler Lines Group
RM500B Reclaimer Mixer Machine Systems Hood
RM500B Reclaimer Mixer Machine Systems Hood - Rear
RM500B Reclaimer Mixer Machine Systems Push Bar
RM500B Reclaimer Mixer Machine Systems Platform
CP34 and CS34 Vibratory Soil Compactors Machine Systems Hydraulic Tank - Remove and Install
CP34 and CS34 Vibratory Soil Compactors Machine Systems Seat - Remove and Install
CP34 and CS34 Vibratory Soil Compactors Machine Systems Wheel and Tire - Remove and Install
CP34 and CS34 Vibratory Soil Compactors Machine Systems Gear Motor (Vibratory) - Remove and Install
CP34 and CS34 Vibratory Soil Compactors Machine Systems Hydraulic Cylinder (Leveling Blade) - Remove and Install
CP34 and CS34 Vibratory Soil Compactors Machine Systems Hydraulic Cylinder (Steering) - Remove and Install
CP34 and CS34 Vibratory Soil Compactors Machine Systems Vibratory Valve - Remove and Install
2014/12/11 Radiator Guard Kit Now Available for Certain R2900G and R3000H Load Haul Dump Machines {7050}
Procedure to Rework the Radiator Guard on Certain R2900G and R3000H Load Haul Dump Machines{7050} Procedure to Rework the Radiator Guard on Certain R2900G and R3000H Load Haul Dump Machines{7050}
RM500B Reclaimer Mixer Machine Systems Pressure Reducing Valve
RM500B Reclaimer Mixer Machine Systems Hydraulic Pump and Mounting
RM500B Reclaimer Mixer Machine Systems Ladder