Illustration 1 | g03668534 |
The hydraulic tank is on the outside of the left-hand frame.
Reference: Refer to Systems Operation, "Hydraulic Tank" for additional information.
Illustration 2 | g03671887 |
The hydraulic tank breather is on the upper portion of the hydraulic tank.
Reference: Refer to Systems Operation, "Hydraulic Tank" for additional information.
Hydraulic Tank Low Level and Temperature Sensor
Illustration 3 | g03671920 |
(1) Hydraulic low-level sensor
(2) Hydraulic temperature sensor |
Hydraulic low-level sensor (1) and hydraulic temperature sensor (2) are on the front of the hydraulic tank behind the cover.
Reference: Refer to Systems Operation, "Electronic Control (Hydraulic System)" for additional information.
Illustration 4 | g03671928 |
View of the service center enclosure hydraulic gauges (1) Steering valve (2) Steering accumulator (3) Hoist valve (4) Front brake (5) Brake control pilot valve (6) Brake supply accumulator (7) Park Brake (8) Rear brake |
The service center enclosure is located behind the cab.
Reference: Refer to Systems Operation, "Brake System" for additional information.
Illustration 5 | g03474797 |
The hoist control lever is located in the cab, mounted to the left side of the operators seat.
Reference: Refer to Systems Operation, "Hoist Control" for additional information.
Hoist Control (Position Sensor)
Illustration 6 | g03475157 |
The hoist control position sensor is at the base of the hoist control lever on the left side of the operators seat.
Reference: Refer to Systems Operation, "Electronic Control (Hydraulic System)" for additional information.
Illustration 7 | g06424703 |
The body position sensor is located at the rear of the machine on the inside of the left-hand frame rail.
Reference: Refer to Systems Operation, "Position Sensor (Truck Body)" for additional information.
Illustration 8 | g03671946 |
The tandem section gear type hoist pump is mounted to the pump drive. The pump drive is driven by a drive link from the generator.
Reference: Refer to Systems Operation, "Gear Pump (Hoist)" for additional information.
Illustration 9 | g03671970 |
The hoist control valve is mounted on a platform on the front of the rear support assembly.
Reference: Refer to Systems Operation, "Control Valve (Hoist)" for additional information.
Control Valve Solenoid (Snub, Float, and Lower)
Illustration 10 | g06329212 |
The snub, float, and lower solenoid is on the front of the control valve.
Reference: Refer to Systems Operation, "Control Valve (Hoist)" and Systems Operation, "Electronic Control (Hydraulic System)"for additional information.
Control Valve Solenoid (Raise)
Illustration 11 | g06329219 |
The raise solenoid is on the rear of the control valve.
Reference: Refer to Systems Operation, "Control Valve (Hoist)" and Systems Operation, "Electronic Control (Hydraulic System)"for additional information.
Illustration 12 | g06329288 |
The dual stage relief valve is on the top side of the control valve.
Reference: Refer to Systems Operation, "Control Valve (Hoist)" for additional information.
Illustration 13 | g06329302 |
The cooling relief valve is located of the right-hand side of the control valve toward the front.
Reference: Refer to Systems Operation, "Control Valve (Hoist)" for additional information.
Illustration 14 | g03672026 |
The hoist cylinders are located in the center of the frame on the outside of the frame rails.
Reference: Refer to Systems Operation, "Hoist Cylinders" for additional information.
Illustration 15 | g03672063 |
The hoist filters are located to the right of the hoist control valve in front of the rear axle.
Reference: Refer to Systems Operation, "Oil Filters (Hoist)" for additional information.
Illustration 16 | g06329306 |
The pressure reducing valve is mounted on rear the hoist control valve.
Reference: Refer to Systems Operation, "Pressure Reducing Valve" for additional information.
Illustration 17 | g03672223 |
The hydraulic oil cooler is mounted to the right-hand side of the engine.
Reference: Refer to Systems Operation, "Hydraulic Oil Cooler" for additional information.
Gear Pump (Pump Drive Lubrication)
Illustration 18 | g03733979 |
The gear pump is a two section gear pump that is mounted to the rear of the hydraulic fan piston pump. The hydraulic fan piston pump is mounted to the pump drive. The pump drive is driven by a drive link from the generator.
Reference: Refer to Systems Operation, "Pump Drive Lubrication System" for additional information.
Illustration 19 | g03733984 |
The pump drive is mounted to a plate assembly in front of the cross tube and is connected to the rear of the generator. The pump drive is driven by a drive link from the generator.
Reference: Refer to Systems Operation, "Pump Drive Lubrication System" for additional information.
Oil Filter (Pump Drive Lubrication)
Illustration 20 | g06333182 |
The pump drive lubrication oil filter is mounted on the left-hand frame rail.
Reference: Refer to Systems Operation, "Pump Drive Lubrication System" for additional information.
Breather (Pump Drive Lubrication)
Illustration 21 | g06333225 |
The breather for the pump drive lubrication system is mounted to the left-hand frame rail.
Reference: Refer to Systems Operation, "Pump Drive Lubrication System" for additional information.