PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE GENERATOR 3890806, GEN, LAS, 40 L7 (2.2 SINGLE PHASE) OR 4159861, GEN, LAS 40 L7 (2.2 THREE PHASE) ON CERTAIN C2.2 MARINE GENERATOR SETS
Usage:
TEBE2403-00
Show/hide table
19Mar2015 |
U-118
A-83
D-100
O-98
TM-2
Show/hide table
Safety | PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE GENERATOR 3890806/">3890806, GEN, LAS, 40 L7 (2.2 SINGLE PHASE) OR 4159861, GEN, LAS 40 L7 (2.2 THREE PHASE) ON CERTAIN C2.2 MARINE GENERATOR SETS |
|
4450 | PI11014 |
Show/hide table
NOTE: | Caterpillar’s obligations under this Service Letter are subject to, and shall not apply in contravention of, the laws, rules, regulations, directives, ordinances, orders, or statutes of the United States, or of any other applicable jurisdiction, without recourse or liability with respect to Caterpillar. |
NOTE: | This Program must be administered as soon as possible.
When reporting the repair, use "PI11014" as the Part Number and "7751" as the Group Number, "56" as the Warranty Claim
Description Code and "T" as the SIMS Description Code.
|
Show/hide table
Show/hide table
Show/hide table
Show/hide table
Show/hide table
PROBLEM
Show/hide table
The generator needs to be replaced on certain C2.2 Marine Generator Sets. The existing generator rotor can rub the stator. It will at first be noisy and could be mistaken for worn/damaged bearings. It may cause overheating of the windings of both the rotor and the stator. Failure of this major component 'the generator' could put other ships systems/operations at risk of malfunction. It may, in conjunction with other factors or circumstances, result in a risk of personal injury or death. |
AFFECTED PRODUCT
Show/hide table
Model | Identification Number |
*******Group 1******* | |
C2.2 | TAG01172, 1191, 1195-1196 |
Show/hide table
*******Group 2******* | |
C2.2 | TAG01173-01174, 1180, 1193, 1198, 1203 |
Show/hide table
*******Group 3******* | |
C2.2 | TAG01155, 1158-1162, 1176, 1178-1179, 1183-1186, 1188-1190 |
Show/hide table
*******Group 4******* | |
C2.2 | TAG01177, 1181-1182, 1192, 1194, 1197 |
PARTS NEEDED
Show/hide table
Qty |
Part Number | Description |
*******Group 1******* | ||
1 | 2305772 | GASKET |
2 | 2455937 | PLUG |
1 | 3890807 | GENERATOR |
1 | 4734525 | KIT-SERVICE |
1 | 4750136 | HOSE-AIR INLET |
In order to allow equitable parts availability to all participating dealers, please limit your initial parts order to not exceed 45% of dealership population. This is an initial order recommendation only, and the ultimate responsibility for ordering the total number of parts needed to satisfy the program lies with the dealer. |
||
*******Group 2******* | ||
1 | 2305772 | GASKET |
2 | 2455937 | PLUG |
1 | 4159863 | GENERATOR |
1 | 4734525 | KIT-SERVICE |
1 | 4750136 | HOSE-AIR INLET |
In order to allow equitable parts availability to all participating dealers, please limit your initial parts order to not exceed 45% of dealership population. This is an initial order recommendation only, and the ultimate responsibility for ordering the total number of parts needed to satisfy the program lies with the dealer. |
||
*******Group 3******* | ||
1 | 2305772 | GASKET |
1 | 3890807 | GENERATOR |
1 | 4734527 | KIT-SERVICE |
In order to allow equitable parts availability to all participating dealers, please limit your initial parts order to not exceed 45% of dealership population. This is an initial order recommendation only, and the ultimate responsibility for ordering the total number of parts needed to satisfy the program lies with the dealer. |
||
*******Group 4******* | ||
1 | 2305772 | GASKET |
1 | 4159863 | GENERATOR |
1 | 4734527 | KIT-SERVICE |
In order to allow equitable parts availability to all participating dealers, please limit your initial parts order to not exceed 45% of dealership population. This is an initial order recommendation only, and the ultimate responsibility for ordering the total number of parts needed to satisfy the program lies with the dealer. |
ACTION REQUIRED
Show/hide table
Replace the generator. 3890806 LSA 40L7 (C2.2, Single phase) Generator and replacing it with 3890807 LSA 42.3 VS3 (C2.2T Single phase) Generator 4159861 LSA 40L7 (C2.2 Three phase) Generator and replacing it with 4159863 LSA 42.3 VS3 (C2.2T Three phase) Generator Rework Procedure: WARNING: Ensure that all lockout/tagout procedures for the site are followed. Read and understand the Safety Section in the Operation and Maintenance Manual. Ensure the area is safe and free from unwanted potential hazards. Isolate the battery and mains voltage before starting work. Refer to the Disassembly and Assembly, RENR7859 for removal and installation instruction of the Generator/Alternator. The mounting hardware service kit required is dependent on the machine group being worked on, OPEN or ENCLOSED Generator Sets. Replace all of the original hardware with the kit. |
Show/hide table
OWNER NOTIFICATION
Show/hide table
Owners in the following countries will receive the attached Owner Notification: US Canada Australia New Zealand |
SERVICE CLAIM ALLOWANCES
Show/hide table
Show/hide table
NOTE: This is a 4.0-hour job for Group 1 | |||||
Show/hide table
Show/hide table
Show/hide table
NOTE: This is a 4.0-hour job for Group 2 | |||||
Show/hide table
Show/hide table
Show/hide table
NOTE: This is a 5.0-hour job for Group 3 | |||||
Show/hide table
Show/hide table
Show/hide table
NOTE: This is a 5.0-hour job for Group 4 | |||||
Show/hide table
PARTS DISPOSITION
Show/hide table
Handle the parts in accordance with your Warranty Bulletin on warranty parts handling. |
MAKE EVERY EFFORT TO COMPLETE THIS PROGRAM AS SOON AS POSSIBLE. |
Show/hide table
EXAMPLE COPY OF OWNER NOTIFICATION XYZ Corporation 3240 Arrow Drive Anywhere, YZ 99999 SAFETY - PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE GENERATOR 3890806/">3890806, GEN, LAS, 40 L7 (2.2 SINGLE PHASE) OR 4159861, GEN, LAS 40 L7 (2.2 THREE PHASE) ON CERTAIN C2.2 MARINE GENERATOR SETS MODELS INVOLVED - C2.2 Dear Cat Product Owner: The generator needs to be replaced on the products listed below. The existing generator rotor can rub the stator, which may cause overheating of the windings. Failure of the generator could put other ship systems/operations at risk of malfunction, and may, in conjunction with other factors or circumstances, result in a risk of personal injury or death. You will not be charged for the service performed. Contact your local Cat dealer immediately to schedule this service. The dealer will advise you of the time required to complete this service. If you are no longer the owner of this product(s), please contact your local Cat dealer so that our records can be updated. You may now search for open Safety Service Letters by entering your product serial number(s). Visit the SAFETY.CAT.COM website and click on the Product Safety page for more information. Please refer the dealer to their Service Letter dated 19Mar2015 when scheduling this service. We regret the inconvenience this may cause you, but urge you to have this service performed for your safety and satisfaction. Caterpillar Inc. Identification #(s) Attached to 19Mar2015 Service Letter |
Caterpillar Information System:
PRODUCT SUPPORT PROGRAM FOR REPLACING 196-4648 AND 196-4649 TURBO COOLANT RETURN TUBES ON CERTAIN G3612 AND G3616 ENGINES PRODUCT SUPPORT PROGRAM FOR REPLACING 196-4648 AND 196-4649 TURBO COOLANT RETURN TUBES ON CERTAIN G3612 AND G3616 ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE 454-6625 WIRING GROUP ON CERTAIN C15, AND C18 GENERATOR SETS EQUIPPED WITH A DEIF CONTROLLER PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE 454-6625 WIRING GROUP ON CERTAIN C15, AND C18 GENERATOR SETS EQUIPPED WITH A DEIF CONTROLLER
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING TURBOCHARGER SHIELDS ON CERTAIN G3520C 1200RPM LANDFILL GENERATOR SETS PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING TURBOCHARGER SHIELDS ON CERTAIN G3520C 1200RPM LANDFILL GENERATOR SETS
PRODUCT SUPPORT PROGRAM FOR REPLACING 205-3584 CUSTOMER INTERCONNECT HARNESS ON CERTAIN G3606, G3608, G3612, AND G3616 ENGINES PRODUCT SUPPORT PROGRAM FOR REPLACING 205-3584 CUSTOMER INTERCONNECT HARNESS ON CERTAIN G3606, G3608, G3612, AND G3616 ENGINES
PRODUCT SUPPORT PROGRAM FOR REWORKING THE 382-9606 AIR STARTER SOLENOID ON CERTAIN C32 ENGINES PRODUCT SUPPORT PROGRAM FOR REWORKING THE 382-9606 AIR STARTER SOLENOID ON CERTAIN C32 ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE OIL TEMPERATURE SENSOR ON CERTAIN PM3516 POWER MODULES PRODUCT SUPPORT PROGRAM FOR REPLACING THE OIL TEMPERATURE SENSOR ON CERTAIN PM3516 POWER MODULES
PRODUCT SUPPORT PROGRAM FOR REPLACING 197-9732 U-BOLT ON THE AIR INLET TUBE ON CERTAIN 3516B LOCOMOTIVE ENGINES, 3516B GENERATOR SETS, 3516C GENERATOR SETS, AND PM3516 POWER MODULES PRODUCT SUPPORT PROGRAM FOR REPLACING 197-9732 U-BOLT ON THE AIR INLET TUBE ON CERTAIN 3516B LOCOMOTIVE ENGINES, 3516B GENERATOR SETS, 3516C GENERATOR SETS, AND PM3516 POWER MODULES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SOFTWARE ON CERTAIN C27 AND C32 PETROLEUM ENGINES PRODUCT SUPPORT PROGRAM FOR REPLACING THE SOFTWARE ON CERTAIN C27 AND C32 PETROLEUM ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING ENGINE IDENTIFICATION PLATE AND LABEL ON CERTAIN C3.4B INDUSTRIAL ENGINES PRODUCT IMPROVEMENT PROGRAM FOR REPLACING ENGINE IDENTIFICATION PLATE AND LABEL ON CERTAIN C3.4B INDUSTRIAL ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE RADIATOR FAN GUARD ON CERTAIN C27 GENERATOR SETS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE RADIATOR FAN GUARD ON CERTAIN C27 GENERATOR SETS
PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE RADIATOR FAN BEARING ON CERTAIN PM3516B POWER MODULES PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE RADIATOR FAN BEARING ON CERTAIN PM3516B POWER MODULES
PRODUCT IMPROVEMENT PROGRAM INSPECTING AND POSSIBLY REWORKING THE LOAD CABLES ON CERTAIN PM1360 POWER MODULES PRODUCT IMPROVEMENT PROGRAM INSPECTING AND POSSIBLY REWORKING THE LOAD CABLES ON CERTAIN PM1360 POWER MODULES
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING DEF FITTING AND AIR FITTING O-RINGS, REORIENTING THE WASHERS ON THE DOSING PUMP HEAD AND REPLACING THE BOLTS AND WASHERS ON THE DOSING PUMP MANIFOLD ON CERTAIN 3516C AND 3516C HD GENERATOR SETS PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING DEF FITTING AND AIR FITTING O-RINGS, REORIENTING THE WASHERS ON THE DOSING PUMP HEAD AND REPLACING THE BOLTS AND WASHERS ON THE DOSING PUMP MANIFOLD ON CERTAIN 3516C AND 3516C HD GENERATOR SETS
PRODUCT SUPPORT PROGRAM FOR RELOCATING THE PRELUBE PUMP ON CERTAIN PMG3516C POWER MODULES (XQ1475G POWER MODULES) PRODUCT SUPPORT PROGRAM FOR RELOCATING THE PRELUBE PUMP ON CERTAIN PMG3516C POWER MODULES (XQ1475G POWER MODULES)
PRODUCT SUPPORT PROGRAM FOR FLUSHING THE COOLING SYSTEM ON CERTAIN C13 INDUSTRIAL ENGINES PRODUCT SUPPORT PROGRAM FOR FLUSHING THE COOLING SYSTEM ON CERTAIN C13 INDUSTRIAL ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE STEEL TRANSMISSION LINES ON CERTAIN TH55-E70 AND TH55FT-E90 PETROLEUM TRANSMISSIONS AND PETROLEUM PACKAGES PRODUCT SUPPORT PROGRAM FOR REPLACING THE STEEL TRANSMISSION LINES ON CERTAIN TH55-E70 AND TH55FT-E90 PETROLEUM TRANSMISSIONS AND PETROLEUM PACKAGES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ENGINE SOFTWARE ON CERTAIN C7.1 GENERATOR SETS (XQ200 POWER MODULES) PRODUCT SUPPORT PROGRAM FOR REPLACING THE ENGINE SOFTWARE ON CERTAIN C7.1 GENERATOR SETS (XQ200 POWER MODULES)
PRODUCT SUPPORT PROGRAM FOR REPAIRING RADIATOR COOLANT LEAKS ON CERTAIN PMG3516C GENERATOR SETS (XQ1475G POWER MODULES) PRODUCT SUPPORT PROGRAM FOR REPAIRING RADIATOR COOLANT LEAKS ON CERTAIN PMG3516C GENERATOR SETS (XQ1475G POWER MODULES)
PRODUCT SUPPORT PROGRAM FOR REWORKING THE INTEGRAL TANK ON CERTAIN C9 GENERATOR SETS PRODUCT SUPPORT PROGRAM FOR REWORKING THE INTEGRAL TANK ON CERTAIN C9 GENERATOR SETS
PRODUCT SUPPORT PROGRAM FOR REPAIRING RADIATOR COOLANT LEAKS ON CERTAIN PMG3516C GENERATOR SETS (XQ1475G POWER MODULES) PRODUCT SUPPORT PROGRAM FOR REPAIRING RADIATOR COOLANT LEAKS ON CERTAIN PMG3516C GENERATOR SETS (XQ1475G POWER MODULES)
PRODUCT SUPPORT PROGRAM FOR MODIFYING THE FLYWHEEL HOUSING AND INSTALLING A PAPER BEADED GASKET ON CERTAIN 3512C HD LOCOMOTIVE ENGINES AT PLANNED COMPONENT REBUILD PRODUCT SUPPORT PROGRAM FOR MODIFYING THE FLYWHEEL HOUSING AND INSTALLING A PAPER BEADED GASKET ON CERTAIN 3512C HD LOCOMOTIVE ENGINES AT PLANNED COMPONENT REBUILD
PRODUCT SUPPORT PROGRAM FOR SEALING THE CYLINDER BLOCK TO FLYWHEEL HOUSING JOINT ON CERTAIN 3512C HD LOCOMOTIVE ENGINES PRODUCT SUPPORT PROGRAM FOR SEALING THE CYLINDER BLOCK TO FLYWHEEL HOUSING JOINT ON CERTAIN 3512C HD LOCOMOTIVE ENGINES
PRODUCT SUPPORT PROGRAM FOR REWORKING THE EXCITER ROTOR ON CERTAIN 3512 GENERATOR SETS PRODUCT SUPPORT PROGRAM FOR REWORKING THE EXCITER ROTOR ON CERTAIN 3512 GENERATOR SETS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE RADIATOR FAN GUARD ON CERTAIN C27 GENERATOR SETS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE RADIATOR FAN GUARD ON CERTAIN C27 GENERATOR SETS