Cylinder Head Valves
Show/hide table
图 1 | g03538778 |
Show/hide table
356-2070 缸盖总成 的技术规格     | |||
项目     | 数量     | 零件     | 技术规格说明     |
1     | 12     | 252-7802 进气门     | 安装前在气门杆上涂抹清洁的发动机机油。 尺寸 (B) 为 9.441 ± 0.008 mm (0.3717 ± 0.0003 in) 表面角度 (D) 为 60.75 ± 0.25 度 气门头直径 (F) 为 44.50 ± 0.13 mm (1.752 ± 0.005 in)。     |
2     | 12     | 248-1467 排气门     | 安装前在气门杆上涂抹清洁的发动机机油。 尺寸 (C) 为 9.441 ± 0.008 mm (0.3717 ± 0.0003 in) 表面角度 (E) 为 45.75 ± 0.25 度 气门头直径 (G) 为 41.50 ± 0.13 mm (1.634 ± 0.005 in)     |
3     | 24     | 224-4441 弹簧     | 试验力下的长度为 50.47 mm (1.987 in) 试验力为 160 ± 13 N (36 ± 3 lb) 试验后的自由长度约为 64.1 mm (2.52 in)     |
4     | 24     | 332-2152 弹簧     | 试验力下的长度为 52.95 mm (2.085 in) 试验力为 320 ± 31 N (72 ± 7 lb) 试验后的自由长度约为 62.7 mm (2.47 in)     |
5     | 24     | 268-2953 阀导管     | 安装前在缸孔上涂抹清洁的发动机机油。 装配前的孔径为 9.508 ± 0.013 mm (0.3743 ± 0.0005 inch) 从缸盖表面到气门导管座的安装高度 (A) 为 20.0 ± 0.5 mm (0.79 ± 0.02 in)     |
6     | 12     | 260-4855 气门座镶圈     | 插入角度为 29.75 ± 0.25 度 外径为 45.525 ± 0.013 mm (1.7923 ± 0.0005 in) 缸盖孔为 45.461 ± 0.015 mm (1.7898 ± 0.0006 in)     |
7     | 12     | 224-1270 气门座镶圈     | 插入角度为 44.75 ± 0.25 度 外径为 42.390 ± 0.015 mm (1.6689 ± 0.0006 in) 缸盖孔为 42.320 ± 0.015 mm (1.6661 ± 0.0006 in)     |
Caterpillar Information System:
966M and 972M Wheel Loaders Sensor Signal (Analog, Active) - Test
793F Series AC Off-Highway Truck Machine Systems Steering Cylinder - Remove and Install
C13, C15, and C18 Tier 4 Final Engines Fuel Manifold (ARD)
C13, C15, and C18 Tier 4 Final Engines Engine Support (Front)
C13, C15, and C18 Tier 4 Final Engines Diesel Exhaust Fluid Tank
C9.3 Tier 4 Final Engines Belt Tensioner
C13, C15, and C18 Tier 4 Final Engines Housing (Front)
C13, C15, and C18 Tier 4 Final Engines Engine Oil Pan
C13, C15, and C18 Tier 4 Final Engines Turbocharger
C11 and C13 Engines Valve Mechanism Cover
C11 and C13 Engines Valve Rocker Arm
C11 and C13 Engines Valve Rocker Arm
C13, C15, and C18 Tier 4 Final Engines Air Lines
14H Motor Grader TA2 Technical Inspection{0372, 1000, 7000, 753T, 7565} 14H Motor Grader TA2 Technical Inspection{0372, 1000, 7000, 753T, 7565}
C11 and C13 Engines Turbocharger
C13, C15, and C18 Tier 4 Final Engines Flywheel Housing Cover
C13, C15, and C18 Tier 4 Final Engines Relay (ARD Nozzle Heater)
C13, C15, and C18 Tier 4 Final Engines Inlet Manifold Air Pressure Sensor
C13, C15, and C18 Tier 4 Final Engines Piston and Rings
C13, C15, and C18 Tier 4 Final Engines Engine Oil Pan
D6 Track Type Tractor Machine Systems Position Sensor (Steering)
C11 and C13 Engines Engine Oil Pan
2014/03/25 A New Air Deflector Is Available For F Series Backhoe Loaders With The Canopy Option {7342}
2014/01/06 An Updated Ether Bottle Bracket for Certain F Series Backhoe Loaders Is Now Used {1456}