Hydraulic Tank - Assemble
- Install valve guide (13) and spring (12).
Show/hide table
Illustration 2 g03501319 - Install valve (11).
Show/hide table
Illustration 3 g03501300 - Install the O-ring seals and housing (10).
Show/hide table
Illustration 4 g03501280 - Install O-ring seal and drain plug (9) and bolts (8). Tighten bolts (8) to a torque of
68 ± 7 N·m (50 ± 5 lb ft) .Show/hide tableIllustration 5 g03501277 - Install screens (7).
Show/hide table
Illustration 6 g03501216 - Install nuts (6). Tighten nuts (6) to a torque of
20 ± 5 N·m (15 ± 4 lb ft) .Show/hide tableIllustration 7 g03501196 - Install sight glass and retainer (5).
Show/hide table
Illustration 8 g03501176 - Install screen (4).
Show/hide table
Illustration 9 g03501173 - Install cap assembly (3).
Show/hide table
Illustration 10 g03501159 - Attach Tooling (A) and a suitable lifting device to cover (1). The weight of cover (1) is approximately
50 kg (110 lb) . Install cover assembly (1) and bolts (2).
Show/hide table
Illustration 1 | g03501338 |
Show/hide table
Improper assembly of parts that are spring loaded can cause bodily injury. To prevent possible injury, follow the established assembly procedure and wear protective equipment. |
Caterpillar Information System:
12M Series 3, 140M Series 3 and 160M Series 3 Motor Graders Location of Components (Hydraulic System)
14L Motor Grader Catalyst (SCR) - Remove and Install
14L Motor Grader Pressure Sensor (ARD Combustion Air) - Remove and Install
836K Landfill Compactor and 834K Wheel Dozer Machine Systems Hydraulic Tank - Disassemble
14L Motor Grader Nozzle Heater Harness - Remove and Install
2014/03/05 New Chassis Software Is Now Available On Certain F Series Large Off-Highway Trucks {7620}
2014/03/25 New Exhaust Manifolds Are Used on 797 and 797B Off-Highway Trucks Equipped with 3524 Engines {1059}
836K Landfill Compactor and 834K Wheel Dozer Machine Systems Hydraulic Tank Guard - Remove and Install
2013/11/18 An Improved Differential Lock Oil Filter Element Is Now Used on Certain 24M Motor Grader {3004}
14L Motor Grader Air Control Valve (ARD Combustion) - Remove and Install
14L Motor Grader Relay (ARD Nozzle Heater) - Remove and Install
771D Off-Highway Truck TA2 Technical Inspection{0372, 1000, 7000, 753T, 7565} 771D Off-Highway Truck TA2 Technical Inspection{0372, 1000, 7000, 753T, 7565}
836K Landfill Compactor and 834K Wheel Dozer Machine Systems Front Frame from Rear Frame - Separate
836K Landfill Compactor and 834K Wheel Dozer Machine Systems Front Frame to Rear Frame - Connect
2013/12/06 Correction to Disassembly and Assembly , "Parking Brake - Install" for Certain R1600G Load Haul Dump Machines {4267}
Check the STIC Control on Certain R1700G, R2900G and R3000H Load Haul Dump Machines{3034, 4343} Check the STIC Control on Certain R1700G, R2900G and R3000H Load Haul Dump Machines{3034, 4343}
2013/10/31 New Metering Pump Group Is Now Introduced in 424B Backhoe Loader {4312}
988K Wheel Loader, 834K Wheel Dozer and 836K Compactor Machine Systems Parking Brake - Remove and Install
2015/01/16 New Pin Assemblies are Now Used in the Truck Body Mounting Groups on Certain Off-Highway Trucks {7258, 7258}
966M and 972M Wheel Loaders Plate Locations and Film Locations
2013/11/15 New Pressure Switch Is Now Used for the Air Conditioner Lines Group on Certain Motor Graders {1808}
14L Motor Grader Nitrogen Oxide Sensor - Remove and Install - Inlet
2014/01/23 New Air Dryer Is Now Used on Certain K and K Series 2 Motor Graders {4285}
Release Notes for Cat® MineStar v3.x.x System{7605} Release Notes for Cat® MineStar v3.x.x System{7605}