Hydraulic Oil Filter - Replace - Fill Filter
Show/hide table
 |
|
Hot oil and hot components can cause personal injury. Do not allow hot oil or hot components to contact skin. |
Show/hide table
| NOTICE |
|---|
|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products. Dispose of all fluids according to local regulations and mandates. |
- Prepare the machine for maintenance. Refer to Operation and Maintenance Manual, "Prepare the Machine for Maintenance".
Show/hide table
Illustration 1 g03425177 - Remove the fill filter (1).
- Remove the used fill filter and discard the used filter properly.
- Install a new filter element.
- Start the engine and operate the engine at low idle. Check for leaks and make any necessary repairs.
- Check the oil level in the hydraulic tank. If necessary, add oil. For the proper procedure, refer to Operation and Maintenance Manual, "Hydraulic Tank Oil - Check".
Caterpillar Information System:
794 AC Off-Highway Truck Fuel System - Fill - Fast Fill Fuel Adapter
326F, 329F and 330F Excavators Machine Systems Main Hydraulic Pump - Assemble
MH3059 Material Handler TA2 Technical Inspection{0372, 1000, 7000, 753T, 7565} MH3059 Material Handler TA2 Technical Inspection{0372, 1000, 7000, 753T, 7565}
326F, 329F and 330F Excavators Machine Systems Main Hydraulic Pump - Disassemble
2013/09/18 New Electronic Control Arm Pods are Now Used on Certain 24M Motor Graders {4343, 6150}
Instructions For Installing The Bracket Assembly For The Steering Cylinder on Certain 16M Motor Graders{0679, 4305, 4313, 5225} Instructions For Installing The Bracket Assembly For The Steering Cylinder on Certain 16M Motor Graders{0679, 4305, 4313, 5225}
MH3049 Material Handler TA2 Technical Inspection{7000} MH3049 Material Handler TA2 Technical Inspection{7000}
Cat® Fleet Onboard v3.x Washing System - Check
2013/08/28 A New Rear Access Ladder Group is Now Used on the 785C Off-Highway Truck {7254}
2013/11/14 New Engine Front Cover Used On Certain Applications Equipped With C13 Machine Engines {1151, 1162, 1206}
Cat® Fleet Onboard v3.x Camera - Clean
Cat® Fleet Onboard v3.x Object Detection Sensor - Clean/Inspect
2013/10/16 A New Rocker Switch for the Secondary Steering Motor is Now Used on Certain 773D, 773E, and 777D Off-Highway Trucks {5073, 5927, 7450, 7451}
Fleet Update Assistant in Cat® MineStar Fleet Office Has Duplicate Columns{7605} Fleet Update Assistant in Cat® MineStar Fleet Office Has Duplicate Columns{7605}
Procedure to Replace the Grounding Stud Assemblies for the Ground Level Control Box Assembly on Certain Large Off-Highway Trucks{1408, 7257, 7332, 7451} Procedure to Replace the Grounding Stud Assemblies for the Ground Level Control Box Assembly on Certain Large Off-Highway Trucks{1408, 7257, 7332, 7451}
794 AC Off-Highway Truck Breather (Fuel Tank) - Replace
2013/09/02 Replacement Grounding Stud Assemblies for the Ground Level Control Box Assembly on Certain Large Off-Highway Trucks are Now Used {1408, 1420, 7257, 7332, 7451}
773E and 777D Off-Highway Truck/Tractor Object Detection System (Two Cameras) Object Detection Sensor - Calibrate
CB22B, CB24B, CB32B and CC24B Vibratory Utility Compactors Machine Systems Motor Support (Vibratory)
773E and 777D Off-Highway Truck/Tractor Object Detection System (Two Cameras) Configuration
773E and 777D Off-Highway Truck/Tractor Object Detection System (Two Cameras) Object Detection Sensor - Adjust
2013/09/06 Release Notes for Cat® Terrain v4.2.1 On-board Software {7605}
PL61 Pipelayer Power Train Systems Track Carrier Roller - System One
Cat® Fleet Onboard v3.x Toolbar Buttons