1996/12/09 Caterpillar

Tools Used To Remove And Install Both Sizes Of Camshaft Bearings In 3500B Engines{1211,0701}

Usage:

3500B Engines

Warranty: G

Features/Benefits

* Used to remove and install two sizes of camshaft bearings - makes overhaul much simpler and reduces chance of bearing damage during installation

* Used with 6V-4077 Camshaft Bearing Tool Group, and 8S-2241 Camshaft Bearing Installation and Removal Group,

* Designed to trap camshaft bearing between camshaft bearing pilot and backup plate - can be pushed (removed) or pulled (installed) using 6V-4077 Camshaft Bearing Tool Group and 8S-2241 Camshaft Bearing Installation and Removal Group

* Install thin-walled bearings by placing 125-2741 Camshaft Bearing Sleeve over the camshaft bearing pilot

* Parts are plated and hardened for durability and long life

Specifications/Technical Information

Larger diameter of pilot - 97.9 mm (3.85 inch)

Small diameter of pilot - 85.9 mm (3.38 inch)

Outside diameter of sleeve - 92.1 mm (3.63 inch)

Illustration 1. (1) 125-2739 Cam Bearing Pilot. (2) 125-2741 Cam Bearing Sleeve. (3) 125-2740 Backup Plate.

Illustration 2. Typical Installation Of Camshaft Bearing

Caterpillar Information System:

1996/12/09 124-9057 Guide (Swirl) Collar Quickly Installs Valve Guides To Proper Height{1104,0701}

1996/12/09 Use 6V-7920 Spanner Wrench To Remove And Install 5P-5813 Pinion Nut{3254,4056,0602}

1996/12/09 124-2946 Lifting Bracket Assembly Makes Rocker Arm Removal And Installation Easier{1123,0701}

1996/12/09 124-0662 Impact Socket For Removing And Installing Cylinder Head Bolts{1100,0602}

1996/12/09 Electronic Control Training Aid{0713}

1996/12/09 Thicker 1U-9646 Pusher And 1U-9647 Pusher Make XT-3 Hose Assembly Easier{0684}

1996/12/09 Remove And Install Threaded Glands On Hydraulic Cylinder Using 9U-7868 Spanner Wrench Group, 9U-7869 Spanner Wrench Group, Eleven Adapter Plates (See Chart B){5456,0738}

1996/12/09 Rotate Crankshaft On 3114, 3116 And 3126 Engines Using 9U-6943 Gear Shaft Housing Assembly Or 9U-7336 Gear Shaft Housing Assembly {1202,0701}

1996/11/25 Procedure For Installing Steel Core Gasket At The Front Housing And The Flywheel Housing {1151,1157,1162}

1996/11/18 Measure Vibration Of Vibratory Compactor Drums With Hand Held Meters{7471,0783}

1996/10/07 Parts Manuals May List Air Conditioning Compressors Incorrectly {1802,1809,7320}

1996/09/30 New Valve Cover Seals Are Used For Mechanical Unit Injector (MUI) And Electronic Unit Injector (EUI) Engines{1107}

1997/01/13 More Collets Now Available For XT5 And XT6 Hoses Using 4C-9480 Hose Tooling Group{0684}

1997/01/13 Use 126-1023 Stem Pusher For Sleeve And Coupling Removal On Hose Assemblies{5057,0684}

1997/01/13 Piston Ring Groove Gauges To Quickly And Accurately Determine Reusability Of Pistons{1214,0763}

1997/01/13 Use 125-9622 Seal Installer To Install 118-9163 Seal In Water Pumps{1361,0708}

1997/01/13 Quickly And Accurately Set Valve Lash{1105,0766}

1997/01/13 Removal And Installation Procedure For The Crankshaft Wear Sleeve{7558,0701}

1997/01/20 Methods Of Obtaining Engine Flash Files {1902}

1997/01/20 New Remanufactured Water Pump Groups Include Cast Iron Impellers {1361}

1997/01/27 Field Repair Of Single Wire Breaks In Harnesses {1408}

1997/01/27 Timing Procedure Aid {1206,1162,1166}

1997/01/27 125-0200 Camshaft Pilot To Remove And Install 106-4584 Camshaft {1202}

1997/01/27 128-3102 Tap Assembly And 128-3104 Stud Puller To Remove Injector Sleeves With Oversized Lower Bore {1125}