Diverter Valve (Secondary Steering) - Remove
Start By:
- Install the steering frame lock. Refer to Disassembly and Assembly, "Steering Frame Lock - Remove and Install".
- Release the pressure in the hydraulic system. Refer to Disassembly and Assembly, "System Pressure - Release".
Note: Cleanliness is an important factor. Before the removal procedure, thoroughly clean the exterior of the component. Thoroughly cleaning the exterior of the component will help to prevent dirt from entering the internal mechanism.
Note: Put identification marks on all lines, on all hoses, on all wires and on all tubes for installation purposes. Plug all lines, all hoses, and all tubes in order to prevent fluid loss and contaminants from entering the system.
- Drain the hydraulic tank into a suitable container for storage or disposal. Refer to Operation and Maintenance Manual, "Capacities (Refill)" for the capacity of the hydraulic tank. Refer to Operation and Maintenance Manual, "Hydraulic System Oil - Change" for the proper draining procedure.
Show/hide table
Illustration 1 g01091151 View from the articulated hitch area - Disconnect hose assembly (2) from secondary steering diverter valve (1).
Show/hide table
Illustration 2 g01091153 - Disconnect hose assembly (3) from secondary steering diverter valve (1).
Show/hide table
Illustration 3 g01091154 View of the right side of the rear frame - Loosen four hose clamps (4). Remove elbow (6) from secondary steering diverter valve (1).
- Disconnect hose assembly (5).
Show/hide table
Illustration 4 g01091155 View of the right side of the rear frame - Disconnect hose assemblies (7) and (10) from secondary steering diverter valve (1).
- Disconnect electrical harness (8).
- Attach a suitable lifting device to secondary steering diverter valve (1). The weight of the secondary steering diverter valve (1) is approximately
44 kg (97 lb) . - Remove three bolts (9), the washer, and the spacers.
Note: Identify the three spacers for assembly purposes.
Caterpillar Information System:
R3000H Load Haul Dump Machine Systems Neutralizer Valve (STIC Steering) - Remove and Install
R3000H Load Haul Dump Machine Systems Control Valve (STIC Steering) - Install
R3000H Load Haul Dump Machine Systems Control Valve (STIC Steering) - Assemble
R3000H Load Haul Dump Machine Systems Control Valve (STIC Steering) - Disassemble
R3000H Load Haul Dump Machine Systems Control Valve (STIC Steering) - Remove
R3000H Load Haul Dump Machine Systems Pilot Valve (STIC Steering) - Install
R3000H Load Haul Dump Machine Systems Pilot Valve (STIC Steering) - Assemble
R3000H Load Haul Dump Machine Systems Pilot Valve (STIC Steering) - Disassemble
R3000H Load Haul Dump Machine Systems Pilot Valve (STIC Steering) - Remove
R3000H Load Haul Dump Machine Systems Gear Pump (Secondary Steering) - Install
R3000H Load Haul Dump Machine Systems Gear Pump (Secondary Steering) - Assemble
R3000H Load Haul Dump Machine Systems Gear Pump (Secondary Steering) - Disassemble
R3000H Load Haul Dump Machine Systems Diverter Valve (Secondary Steering) - Disassemble
R3000H Load Haul Dump Machine Systems Diverter Valve (Secondary Steering) - Assemble
R3000H Load Haul Dump Machine Systems Diverter Valve (Secondary Steering) - Install
R3000H Load Haul Dump Machine Systems Steering Cylinder - Remove
R3000H Load Haul Dump Machine Systems Steering Cylinder - Install
R3000H Load Haul Dump Machine Systems Brake Accumulator - Remove
R3000H Load Haul Dump Machine Systems Brake Accumulator - Install
R3000H Load Haul Dump Machine Systems Accumulator Charging Valve (Brake) - Remove
770G and 772G Off-Highway Truck/Tractors Indicator Lamp Is On Continuously
2012/09/10 Loctite Added to Yoke Bolts on Certain Wheel Loaders and Underground Mine Machines {3075, 3159}
247-1400 Front Conversion Ar for Certain Vibratory Soil Compactors{5050, 5612, 5622, 7000} 247-1400 Front Conversion Ar for Certain Vibratory Soil Compactors{5050, 5612, 5622, 7000}
MH3049 Material Handler Hydraulic System General Information (Boom System)