Correct Torque Required For Bolts In Rear Gear Groups; Specification Omitted From Some Service Manuals{1204,1237,7568}
Usage:
3500 Family Of Engines
The bolts used in the Rear Gear Group must be tightened according to specifications. However, the correct torque value for the 1A5822 Bolt was omitted from several publications. Both the left and the right hand stub shafts contain two of these bolts (1). The bolts secure idler shafts (2) to the cylinder block. The correct bolt torque is 135 ± 15 N·m (100 ± 11 lb ft). See the illustrations. Add this information to the Specification Modules and the Disassembly And Assembly Modules in the appropriate Service Manuals.
Bolt locations on the rear gear group for 3508 Engines.
Bolt locations on the rear gear group for 3512 and 3516 Engines.
The following modules contain the CORRECT information.
- Disassembly And Assembly Module, Forms
- SENR3140, SENR3283, SENR3425.
- Specification Module, Form SENR4620.
- SENR3140, SENR3283, SENR3425.
- Disassembly And Assembly Module, Form
- SENR3882.
- Specification Module, Form SENR3878.
- SENR3882.
- Disassembly And Assembly Module, Form
- SENR3882
- Specification Module, Form SENR4636.
- SENR3882
Caterpillar Information System:
1990/04/02 New Valve Lifter Improves Oil Flow To Top Of Engine{1112,1119}
1990/04/02 New Flywheel Ring Gear Available To Improve Starter Engagement{1158,1454}
1990/04/02 Correct Replacement Of Forward Warning Horns{7402}
1990/03/26 Caterpillar Announces 460 hp 3406B (5YG) Heavy-Duty Diesel Truck Engine {1000}
1990/03/26 New Personality Modules Require New Service Program Modules {1902}
1990/03/26 New Oil Control Piston Ring Used In 3300 Family Of Engines {1213,1214,1215}
1990/03/19 Possible Overvoltage Conditions From Output Of VR3 Voltage Regulator {4467,4474}
1990/03/19 New Air Conditioner Thermostatic Switches Used {7337}
1990/03/12 9W2126 Module (Relay Module){7490}
1990/03/12 Idle Shutdown Timer Used In Auxiliary Power Applications{1705,1706,4267}
1990/03/12 Shorter Bolt Used To Hold Oil Pan Drain Cover{1302}
1990/03/12 New Rear Gear Group Has Spur Gears Instead Of Helical Gears For Longer Service Life{1204,1206,1212}
1990/04/02 Improved Filter Service Film For Duplex Fuel{1261,7557}
1990/04/02 What's Your Answer?{0315,1000,1250,3000}
1990/04/09 New Turbocharger Group For 3512 (24Z) High Speed Generator Set Engines{1052}
1990/04/09 Improvements, Maintenance and Troubleshooting Information For Electric Starting Motors{1453,7521,7524,7526}
1990/04/09 What's Your Answer?{0315,0114,0785,1400}
1990/04/23 Part Numbers For Polyvee Belts From Original Equipment Manufacturers (OEM's){1357}
1990/04/23 New Rocker Arm Assemblies Have New Inserts And Buttons{1123}
1990/04/23 New Crankcase Side Cover Use With Centrifugal Oil Filter Group{1328}
1990/04/23 Oil Level Gauge (Dipstick) Marks For 3116 Marine Engines{1326}
1990/04/30 Data Link Adapter For 3176 And 3406B PEEC (Programmable Electronic Engine Controls) Used In Navistar Trucks{1900}
1990/04/30 Reconditioning Of Bridge Wear Seat Is Permitted; Will Prevent Bridge Replacement When Not Necessary{1121}
1990/05/07 Customer Interface Control Module Available {4490,7400}