3408 & 3408B INDUSTRIAL & MARINE ENGINE ATTACHMENTS Caterpillar

Linkage is shown in the SHUTOFF position.

(1) Torque for studs ... 14 ± 4 N·m (10 ± 3 lb.ft.)

Linkage adjustment:

1. Make sure the output shaft of the actuator is in the SHUTOFF position.

2. Install lever (A) so that angle (B) between the lever and horizontal is ... 45° ± 5°

3. With both levers (A and D) in the SHUTOFF position adjust rod assembly (C) to fit between them.