Hood - Remove and Install
Removal Procedure
Show/hide table
Required Tools     | |||
Tool     | Part Number     | Part Description     | Qty     |
A     | 138-7574     | Link Bracket     | 4     |
Start By:
- Install the body retaining pin.
- Disconnect tube (1) and harness assembly (2) .
Show/hide table
Illustration 1 | g02750500 |
- Attach Tooling (A) and a suitable lifting device to hood (4). The weight of hood (4) is approximately 215 kg (470 lb). Remove bolts (3) and hood (4)
Show/hide table
Illustration 2 | g02749196 |
Installation Procedure
- Install hood (4) in the reverse order of removal.
Caterpillar Information System:
299D and 299D XHP Compact Track Loaders and 272D and 272D XHP Skid Steer Loaders Machine Electronic Control System General Information
521B and 522B Track Feller Bunchers Daily Inspection
C27 and C32 Engines for Caterpillar Built Machines Housing (Rear) - Remove and Install
2011/11/02 Coolant Additive is Now used on Certain Motor Graders {1352, 1395}
259D, 279D, 289D, 299D, 299D XHP, 299D2 and 299D2 XHP Compact Track Loaders, 257D, 277D, 287D, 297D, 297D XHP, 297D2 and 297D2 XHP Multi Terrain Loaders and 236D, 242D, 246D, 262D, 272D, 272D XHP, 272D2 and 272D2 XHP Skid Steer Loaders Piston Pump (Work Tool) - High Flow
521B and 522B Track Feller Bunchers Machine Systems Swing Motor Relief Valve Pressure - Test and Adjust
793F CMD Off-Highway Truck/Tractor Braking System MID 116 - CID 0168 - FMI 04
C27 and C32 Engines for Caterpillar Built Machines Housing (Front) - Remove and Install
553C, 563C, and 573C Wheel Feller Bunchers TA2 Technical Inspection{1000, 7000, 753T} 553C, 563C, and 573C Wheel Feller Bunchers TA2 Technical Inspection{1000, 7000, 753T}
793F CMD Off-Highway Truck/Tractor Braking System MID 116 - CID 0168 - FMI 03
521B and 522B Track Feller Bunchers Machine Systems Pump Control (Output Flow) - Adjust
793F CMD Off-Highway Truck/Tractor Braking System MID 116 - CID 0168 - FMI 02
521B and 522B Track Feller Bunchers Alternate Exit
Machine Preheater for Track Feller Bunchers Machine Preparation for Troubleshooting
299D and 299D XHP Compact Track Loaders and 272D and 272D XHP Skid Steer Loaders Machine Electronic Control System Features
R3000H Load Haul Dump Central Lubrication System - Lubricate - If Equipped
R3000H Load Haul Dump Circuit Breakers - Reset
R3000H Load Haul Dump Collet Pin Bolt Torque - Check
R3000H Load Haul Dump Cooling System Coolant Extender (ELC) - Add
R3000H Load Haul Dump Cooling System Coolant Level - Check
R3000H Load Haul Dump Cooling System Coolant (ELC) - Change
R3000H Load Haul Dump Cooling System Coolant Sample (Level 1) - Obtain
R3000H Load Haul Dump Cooling System Coolant Sample (Level 2) - Obtain
R3000H Load Haul Dump Cooling System Pressure Cap - Clean/Replace