Removal Procedure
Required Tools     | |||
---|---|---|---|
Tool     | Part Number     | Part Description     | Qty     |
A     | 140-7742     | Sleeve     | 3     |
B     | 318-1491     | Offset Wrench     | 1     |
Start By:
- Connect the steering frame lock.
Personal injury can result from contact with refrigerant. Contact with refrigerant can cause frost bite. Keep face and hands away to help prevent injury. Protective goggles must always be worn when refrigerant lines are opened, even if the gauges indicate the system is empty of refrigerant. Always use precaution when a fitting is removed. Slowly loosen the fitting. If the system is still under pressure, release it slowly in a well ventilated area. Personal injury or death can result from inhaling refrigerant through a lit cigarette. Inhaling air conditioner refrigerant gas through a lit cigarette or other smoking method or inhaling fumes released from a flame contacting air conditioner refrigerant gas, can cause bodily harm or death. Do not smoke when servicing air conditioners or wherever refrigerant gas may be present. Use a certified recovery and recycling cart to properly remove the refrigerant from the air conditioning system. |
- Refer to Operation and Maintenance Manual, "System Pressure - Release".
- Refer to Service Manual, SENR5664, "Air Conditioning and Heating Systems with R-134a Refrigerant" for the correct procedure. Refer to Special Publication, NENG2500, "Air Conditioning Tools" for the correct tools.
- Remove cover (1) .
Illustration 1 | g01411502 |
- Disconnect harness assemblies (2). Disconnect hoses (3) .
Illustration 2 | g01411507 |
- Disconnect hose assemblies (4). Remove clips (5), clip (6) and clip (7) .
Illustration 3 | g01411515 |
- Remove bolts (8) and remove cover (9). Repeat this step for the opposite side of the machine.
Illustration 4 | g02731329 |
- Disconnect ground strap (10) .
Illustration 5 | g01411717 |
- Disconnect harness assembly (11) .
Illustration 6 | g01411723 |
- Disconnect harness assemblies (12) and harness assemblies (13) .
Illustration 7 | g01411727 |
- Remove bolts (14) in order to remove step assembly (15). Repeat this step for the opposite side of the machine.
Illustration 8 | g01411736 |
- Attach Tooling (A) and suitable lifting devices to cab (16). The weight of cab (16) is approximately 1270 kg (2800 lb).
Illustration 9 | g01411744 |
- Remove bolts (17) .
Note: Use Tooling (B) in order to remove bolts (17) that are surrounded by the fuel tanks.
Illustration 10 | g01411746 |
- Disconnect harness assembly (18) .
Illustration 11 | g01411767 |
- Use Tooling (A) and the suitable lifting devices to remove cab (16) from the machine.
Illustration 12 | g01411744 |