Fan
Usage:
Remove & Install Fan
1. Remove the fan guards if so equipped.
2. Remove four nuts (2) and the washers that hold fan (1) to the fan drive clutch assembly. Remove the fan.
NOTE: The following steps are for the installation of the fan.
3. Put fan (1) in position on the fan drive clutch assembly. Install the four washers and nuts (2) that hold it. Tighten the nuts to a torque of 44.5 ± 3.5 N·m (32.9 ± 2.6 lb ft).
4. Install the fan guards if so equipped.
Caterpillar Information System:
3114 AND 3116 DIESEL TRUCK ENGINES Oil Level Gauge Group
3114 AND 3116 DIESEL TRUCK ENGINES Engine Oil Filter, Oil Filter Base & Engine Oil Cooler
3114 AND 3116 DIESEL TRUCK ENGINES Oil Filler
3114 AND 3116 DIESEL TRUCK ENGINES Water Pump Drive V-Belt
3114 AND 3116 DIESEL TRUCK ENGINES Water Pump Drive
3114 AND 3116 DIESEL TRUCK ENGINES Water Temperature Regulator
3114 AND 3116 DIESEL TRUCK ENGINES Water Pump
3114 AND 3116 DIESEL TRUCK ENGINES Air Cleaner Group
3114 AND 3116 DIESEL TRUCK ENGINES Alternator V-Belts
3114 AND 3116 DIESEL TRUCK ENGINES Alternator
Caterpillar G3500 Engines Caterpillar G3500 Engines
3114 & 3116 DIESEL TRUCK ENGINES Testing And Adjusting
3114 AND 3116 DIESEL TRUCK ENGINES Fan Drive Clutch Assembly
3114 AND 3116 DIESEL TRUCK ENGINES Fan Drive
3114 AND 3116 DIESEL TRUCK ENGINES Starting Motor
3114 AND 3116 DIESEL TRUCK ENGINES Air Compressor
3114 AND 3116 DIESEL TRUCK ENGINES Power Steer Pump Group
3114 AND 3116 DIESEL TRUCK ENGINES Fuel Priming Pump
3114 AND 3116 DIESEL TRUCK ENGINES Fuel Filter & Fuel Filter Base
3114 AND 3116 DIESEL TRUCK ENGINES Governor & Fuel Transfer Pump
3114 AND 3116 DIESEL TRUCK ENGINES Engine Support (Front)
3114 AND 3116 DIESEL TRUCK ENGINES Engine Supports (Rear)
3114 AND 3116 DIESEL TRUCK ENGINES Lifting Group (Front)
3114 AND 3116 DIESEL TRUCK ENGINES Lifting Group (Rear)