Fuel Injection Nozzle And Adapter
Usage:
(1) Torque for fuel injection line nut ... 48 ± 7 N·m (35 ± 5 lb ft)
(2) Torque for retainer ... 48 ± 7 N·m (35 ± 5 lb ft)
(3) Tighten bleed screw to a torque of ... 2.2 ± 0.8 N·m (20 ± 7 lb in)
Always use a new washer (seal) anytime the bleed screw is removed.
(4) Washer. Make sure the correct washer is used when the nozzle assembly is installed.
(5) Put liquid soap on the rubber O-ring seal and in the bore in the head before assembly.
(6) Put 5P3931 Anti-Seize Compound on the threads of the adapter before installation. Tighten the adapter to a torque of ... 205 ± 14 N·m (150 ± 10 lb ft)
Caterpillar Information System:
3406C DIESEL TRUCK ENGINE Fuel Injection Lines
3406C DIESEL TRUCK ENGINE Fuel System Identification
3406C DIESEL TRUCK ENGINE Engine Design
3406C DIESEL TRUCK ENGINE Introduction
3406C (PEEC III) TRUCK ENGINE 3406C (PEEC III) OEM Related Wiring Schematic
3406C (PEEC III) TRUCK ENGINE 3406C (PEEC III) System Wiring Diagram
3406C (PEEC III) TRUCK ENGINE 3406C (PEEC III) Component Warranty and Programming Responsibility
3406C (PEEC III) TRUCK ENGINE Diagnostic Codes
3406C (PEEC III) TRUCK ENGINE Faults Without Throttle Response
3406C (PEEC III) TRUCK ENGINE Faults With Throttle Response
3406C (PEEC III) TRUCK ENGINE Using The Check Engine Light To Check For Diagnostic Codes
3406C (PEEC III) TRUCK ENGINE 3406C (PEEC III) System Operations
3406C DIESEL TRUCK ENGINE Fuel Transfer Pump
3406C DIESEL TRUCK ENGINE Fuel Injection Pump
3406C DIESEL TRUCK ENGINE Fuel Injection Pump Housing
3406C DIESEL TRUCK ENGINE Governor
3406C DIESEL TRUCK ENGINE Switch Group (Used On Engines With BrakeSaver)
3406C DIESEL TRUCK ENGINE Governor Control Linkage
3406C DIESEL TRUCK ENGINE Ether Starting Aid
3406C DIESEL TRUCK ENGINE Fuel Ratio Control
3406C DIESEL TRUCK ENGINE Primary Fuel Filter
3406C DIESEL TRUCK ENGINE Fuel Filter Base
3406C DIESEL TRUCK ENGINE Governor And Fuel Pump Drive Group (4W4619 Only)(Automatic Timing Advance Unit)
3406C DIESEL TRUCK ENGINE Governor And Fuel Pump Drive Group (Automatic Timing Advance Unit)