Engine Oil Filter and Oil Filter Base - Remove and Install
拆卸步骤
Show/hide table
所需工具     | |||
工具     | 零件号     | 零件描述     | 数量     |
A     | 185-3630     | 卷带式扳手     | 1     |
Show/hide table
注意 |
---|
在检验、保养、测试、调整及维修发动机时,请小心确保盛接流出的液体。 在打开或拆解任何储有液体的部件之前,要准备好合适的容器收集液体。 有关适合收集和盛接卡特彼勒产品上的液体的工具和供应品,请参阅专门出版物, NENG2500, "卡特彼勒代理商工具目录"。 按照本地法规和条例处置所有液体。 |
Show/hide table
滚热的油或液压油的压力会对人员造成伤害。 发动机停机之后,液压油的压力仍会保留在液压系统里。 对液压系统进行维修之前,如果不事先释放压力,可能会造成严重伤害。 卸下液压系统的部件或管路时,确保所有的作业机具都已降到地面上,而且液压油温度已冷。 只能在发动机停机,并且加注口盖冷却到可以用徒手触摸时才能卸下加注口盖。 |
- 松开卡箍 (6) 上螺栓。 拆下卡箍 (6) 。
Show/hide table
图 1 | g01764223 |
- 使用工具 (A) 拆下滤清器 (5) 。
- 将机油滤清器底座内含的机油排入适当容器中以便存放或弃置。
- 断开线束组件 (1) 。
- 断开软管组件 (2) 。 拆下夹子 (3) 后将管组件放到一旁。
- 断开管组件 (4) 。
- 卸下螺栓 (8) ,然后卸下滤清器底座 (7) 。
Show/hide table
图 2 | g01764273 |
安装步骤
- 安置滤清器底座 (7) ,然后安装螺栓 (8) 。
Show/hide table
图 3 | g01764273 |
- 连接管组件 (4) 。
Show/hide table
图 4 | g01764223 |
- 连接软管组件 (2) 。 安置管组件并安装夹子 (3) 。
- 连接线束组件 (1) 。
- 安装滤清器 (5) 。
- 定位卡箍 (6) 然后拧紧螺栓。
- 将机油加注到发动机中。 请参阅操作和保养手册, "发动机机油和滤清器 - 更换"。
Caterpillar Information System:
CB54 and CB64 Asphalt Compactors Machine Systems Water Tank - Remove and Install
2009/06/01 New Motor Assemblies for the Air Conditioner Condenser Have Increased Durability {1356, 1360, 1386, 5057}
2008/12/22 A New Coil is Now Used on the Propel Pump Solenoid on Utility Compactors {5070, 5479}
120K and 120K Series 2 Motor Graders Power Train Transmission Oil Filter Base - Assemble
Measuring the Inner Circumference of the Rubber Tracks on Certain Multi-Terrain Loaders {4198} Measuring the Inner Circumference of the Rubber Tracks on Certain Multi-Terrain Loaders {4198}
120K and 120K Series 2 Motor Graders Power Train Transmission Oil Filter Base - Disassemble
Steering Issues May Be Caused By the Shuttle Valve On Some Backhoe Loader Models{5264} Steering Issues May Be Caused By the Shuttle Valve On Some Backhoe Loader Models{5264}
2008/12/29 A New Piston is Now Used in Certain Motor Graders {3077, 4267}
2009/02/23 A New Throttle Slave Cylinder and Mounting Group is Now Used {1264}
Operational Checking Procedure for the Secondary Steering System Installed on R2900G Load Haul Dumps{4300} Operational Checking Procedure for the Secondary Steering System Installed on R2900G Load Haul Dumps{4300}
Operational Checking Procedure for the Secondary Steering System Installed on R1700G Load Haul Dumps{4300} Operational Checking Procedure for the Secondary Steering System Installed on R1700G Load Haul Dumps{4300}
2008/12/22 A New Protection Cover for the Dashboard is Now Used on PM-102 Cold Planers {7314}
3500B Engines for 776D, 777D, 784C, 785C, 789C and 793C Off-Highway Trucks MID 036 - CID 0273 - FMI 00 Turbo Outlet Pressure above normal
2008/12/15 Improved Valve Components Are Used {1100, 1105, 1108}
795F AC and 795F AC XQ Off-Highway Truck Power Train Pump Drive
793F CMD (Command for Hauling) Off-Highway Truck Plate Locations and Film Locations
793F and 797F Off-Highway Trucks Chassis Electronic Control System MID 087 - CID 0590 - FMI 09
793F and 797F Off-Highway Trucks Chassis Electronic Control System MID 087 - CID 0590 - FMI 14
793F and 797F Off-Highway Trucks Chassis Electronic Control System MID 087 - CID 0702 - FMI 03
795F AC and 795F AC XQ Off-Highway Truck Power Train Pump and Motor (Final Drive Lubrication)
793F and 797F Off-Highway Trucks Chassis Electronic Control System MID 087 - CID 0702 - FMI 04
793F and 797F Off-Highway Trucks Chassis Electronic Control System MID 087 - CID 0702 - FMI 08
793F and 797F Off-Highway Trucks Chassis Electronic Control System MID 087 - CID 0724 - FMI 03
793F and 797F Off-Highway Trucks Chassis Electronic Control System MID 087 - CID 0724 - FMI 05