Required Tools | |||
Tool | Part Number | Part Description | Qty |
A | 1P-1855 | Retaining Ring Pliers | 1 |
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
Note: Inspect the O-ring seals, the seals, and the gaskets. Replace the O-ring seals, the seals, and the gaskets that are worn or damaged.
Note: Lubricate the O-ring seals lightly with the lubricant that is being sealed.
- Install O-ring seal (11).
Show/hide table
Illustration 2 g01626648 - Install fluid sampling valve (12).
Show/hide table
Illustration 3 g01626642 Show/hide tablePersonal injury can result from being struck by parts propelled by a released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to release the spring force.
- Install spring (9), plunger (8), and bypass switch (8).
Show/hide table
Illustration 4 g01626635 Show/hide tablePersonal injury can result from being struck by parts propelled by a released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to release the spring force.
- Install plug (6). Install spring (4) and retainer (3).
- Press down retainer (3) in order to compress spring (4).
- Use Tooling (A) in order to install retaining ring (5).
- Install screen assembly (2).
Show/hide table
Illustration 5 g01626631 - Install housing assembly (1).
Illustration 1 | g01626649 |
End By:
- Install the oil filter and base (parking brake release). Refer to Disassembly and Assembly, "Oil Filter and Base (Parking Brake Release) - Install".