Electric Starting Motor
Usage:
Remove and Install Starting Motor
1. Disconnect the wires from the starting motor.
2. Fasten a hoist to the starting motor. Remove three bolts (1) that hold the starting motor to flywheel housing. Remove the electric starting motor. The weight of the starting motor is 32 kg (70 lb.).
NOTE: The following steps are for installation of the electric starting motor.
3. Fasten a hoist, and install the electric starting motor on the flywheel housing. Install the three bolts (1) that hold the starting motor to flywheel housing.
4. Connect the wires to the starting motor.
Caterpillar Information System:
3406B DIESEL ENGINE FOR GENERATOR SETS Fuel Injection Line Adapters
3406B DIESEL ENGINE FOR GENERATOR SETS Valve Covers
3406B DIESEL ENGINE FOR GENERATOR SETS Fuel Injection Pump Housing
3406B DIESEL ENGINE FOR GENERATOR SETS Fuel Injection Pumps
3406B DIESEL ENGINE FOR GENERATOR SETS Governor
3406B DIESEL ENGINE FOR GENERATOR SETS Fuel Injection Pump Housing And Governor
3406B DIESEL ENGINE FOR GENERATOR SETS Fuel Transfer Pump
3406B DIESEL ENGINE FOR GENERATOR SETS Fuel Filter And Base
3406B DIESEL ENGINE FOR GENERATOR SETS Fuel Injection Lines
3406B DIESEL ENGINE FOR GENERATOR SETS Radiator
3406B DIESEL ENGINE FOR GENERATOR SETS Engine Design
SUPPLEMENT FOR 3114 & 3116 GENERATOR SET ENGINE Testing and Adjusting
3406B DIESEL ENGINE FOR GENERATOR SETS Turbocharger
3406B DIESEL ENGINE FOR GENERATOR SETS Water Temperature Regulator
3406B DIESEL ENGINE FOR GENERATOR SETS Engine Oil Cooler
3406B DIESEL ENGINE FOR GENERATOR SETS Oil Filter And Base
3406B DIESEL ENGINE FOR GENERATOR SETS Oil Filter Base
3406B DIESEL ENGINE FOR GENERATOR SETS Exhaust Manifold
3406B DIESEL ENGINE FOR GENERATOR SETS Water Pump
3406B DIESEL ENGINE FOR GENERATOR SETS Fan Drive
3406B DIESEL ENGINE FOR GENERATOR SETS Vibration Damper And Pulley
3406B DIESEL ENGINE FOR GENERATOR SETS Engine Front Support
3406B DIESEL ENGINE FOR GENERATOR SETS Timing Gear Cover
3406B DIESEL ENGINE FOR GENERATOR SETS Timing Gears And Plate