450E Backhoe Loader Axles, Differential and Brakes Caterpillar


Wheel and Tire (Rear) Wheel and Tire (Rear)

Usage:

450E EBL


Illustration 1g03776756

Table 1
Specification for 201-1920 Tire Valve Gp 
Item  Qty  Part  Specification Description 
201-1919 Nut  Mounting surface of the wheel hub, wheel nuts, washers, and the flat mounting surfaces of the wheels must be clean and free of or paint. Before assembly, apply one drop of clean lubrication oil to the threads. 
Use the following procedure to tighten the nut (1):
Tighten the nut to 190 ± 10 N·m (140 ± 7 lb ft).
Again, tighten the nut to an additional angle of 60 ± 5 degrees.
6D-0337 Tire Valve Gp  Torque to 5.6 ± 0.6 N·m (49.6 ± 5.3 lb in)

Caterpillar Information System:

2007/04/23 A New Hystat Pump Improves Reliability {3203, 5070}
777E, 777F and 777G Off-Highway Truck Muffler - Remove and Install
C9 Engine for the 816F Series 2 Landfill Compactor, the 815F Series 2 Soil Compactor, and the 814F Series 2 Wheel Dozer Inlet Air Is Restricted
777E, 777F and 777G Off-Highway Truck Magnetic Switch (Prelubrication Relay) - Remove and Install
814F Series 2 Wheel Dozer, 815F Series 2 Soil Compactor and 816F Series 2 Landfill Compactor Braking System Position Sensor (Left Brake Pedal) (Decelerator)
C175-16 and C175-20 Engines for Off-Highway Trucks Cylinder Block - Type 1
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Secondary Steering System Control Manifold (Steering Backup) - Test
AS3251C Asphalt Paver Vibratory Group - Install
AS3301C Asphalt Screed Vibratory Group - Assemble
AS3301C Asphalt Screed Vibratory Group - Disassemble
AS3251C Asphalt Paver Vibratory Group - Remove
AS3301C Asphalt Screed Gear Motor (Vibratory) - Install
814F Series 2 Wheel Dozer, 815F Series 2 Soil Compactor and 816F Series 2 Landfill Compactor Power Train Transmission Pressures - Test and Adjust
CP54 and CS54 Vibratory Soil Compactors Engine Supplement Air Cleaner - Remove and Install
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System MID 027 - CID 1960 - FMI 09
2006/11/27 A New Base Standoff is Now Available for Reclaimer Mixers {6636, 6637}
AS3251C Asphalt Paver Power Adjuster Motor Group (Crown) - Remove
AS3251C Asphalt Paver Power Adjuster Motor Group (Crown) - Install
AS3251C Asphalt Paver Power Adjuster Motor Group (Extender Height) - Remove
793D Off-Highway Truck/Tractor Center Arm (Steering) - Remove and Install
AS3251C Asphalt Paver Power Adjuster Motor Group (Extender Height) - Install
Bench Test Procedure for Hydraulic Piston Pumps {4306, 5070, 5084} Bench Test Procedure for Hydraulic Piston Pumps {4306, 5070, 5084}
C13, C15, and C18 Tier 4 Final Engines Variable Valve Actuator Oil Diverter Valve
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System MID 027 - CID 1961 - FMI 03
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.