Lift Arms - Install
Installation Procedure
Show/hide table
| Required Tools | |||
| Tool | Part Number | Part Name | Qty |
| A | 1P-2860 | Retaining Ring Pliers | 1 |
| B | 138-7575 | Link Bracket | 2 |
| C | 140-7742 | Sleeve | 2 |
- Attach a suitable lifting device to the lift arm assembly (10). Use Tooling (C) on the rear of the lift arm assembly, as shown. The lift arm assembly weighs approximately 442 kg (975 lb). Install the lift arm assembly.
Show/hide table
 | |
| Illustration 1 | g01060602 |
Show/hide table
 | |
| Illustration 2 | g01060618 |
- Connect harness assembly (9) .
Show/hide table
 | |
| Illustration 3 | g01060614 |
- Connect tube assemblies (8). Install clamps (7). Repeat this step for the other side of the lift arms.
Show/hide table
 | |
| Illustration 4 | g01060440 |
- Raise the rod end of the lift cylinder. Install pin (4). Use Tooling (A) in order to install retaining ring (3). Repeat this step for the other side of the lift arms.
Show/hide table
 | |
| Illustration 5 | g01060426 |
- Raise the link assembly and install pin assembly (2). Install the bolt and the washer (not shown) that is located on the back side of pin (2). Install bolt (1). Repeat this step for the other side of the lift arms.
- Install pin assembly (6). Install bolt (5) .
- Tilt the cab. Refer to Disassembly and Assembly, "Cab - Tilt".
End By:
- Install the tilt cylinder. Refer to Disassembly and Assembly, "Tilt Cylinder - Remove and Install".
- Install the quick coupler. Refer to Disassembly and Assembly, "Quick Coupler - Remove and Install".
Caterpillar Information System:
267B, 277B and 287B Multi Terrain Loaders Power Train Bogie Suspension - Install - 287 Multi Terrain Loaders
SCJ and 8SC Series Alternators Stator - Test
SCJ and 8SC Series Alternators Field Winding - Test
SCJ and 8SC Series Alternators Capacitor - Test
AP-1055B and BG-2455C Asphalt Pavers Auxiliary System Piston Motor (Generator)
AD45B Underground Articulated Truck Power Train Output Transfer Gears - Assemble
AD45B Underground Articulated Truck Power Train Output Transfer Gears - Disassemble
2004/04/19 A Firewall Provides a Barrier Between the Hydraulic Hoses and the Exhaust Manifold {7262, 7401}
267B, 277B and 287B Multi Terrain Loaders Power Train Bogie Suspension - Remove - 287 Multi Terrain Loaders
2004/05/10 New Test ECM Available for Machines {0785, 7610}
312C, 315C, 318C, 319C, 320C, 321C, 322C, 325C, 330C and M325C Excavators and 325C MHPU and 330C MHPU Mobile Hydraulic Power Units Engine and Pump Control - V2 Warning "Hydraulic Oil Level Is Low" Is Displayed - Troubleshoot
2004/03/22 Special Instruction, REHS1798, "Installing the 233-5870 Installation Arrangement (AIR CONDITIONER CONVERSION) (KIT)" Is Available {7304, 7320}
AP-1000B and BG-260C Asphalt Pavers Fire Extinguisher Location
AP-1055B and BG-2455C Asphalt Pavers Auxiliary System Hydraulic Cylinder (Throttle Control)
AP-1055B and BG-2455C Asphalt Pavers Auxiliary System Piston Pump (Generator)
216B, 216B2, 226B, 226B2, 232B, 232B2, 242B and 242B2 Skid Steer Loaders Machine Systems Lift Cylinder - Install
770 and 772 Off-Highway Truck Air Conditioner Filter - Clean
414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Machine Systems Diagnostic Code List
AP-1055B and BG-2455C Asphalt Pavers Auxiliary System Control Valve (Generator)
AP-1055B and BG-2455C Asphalt Pavers Auxiliary System Hydraulic Cylinder (Track Tension)
216B, 216B2, 226B, 226B2, 232B, 232B2, 242B and 242B2 Skid Steer Loaders Machine Systems Diverter Valve - Remove
267B, 277B and 287B Multi Terrain Loaders Power Train Axle (Rear) - Remove and Install - 267B and 277B Multi Terrain Loaders
414E, 416E, 420E and 430E Backhoe Loaders MID 039 - CID 0368 - FMI 03
414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Machine Systems MID 039 - CID 0368 - FMI 04