Roller Frame Mounting
`
D11 Track-Type Tractor Systems
[M0082088]
D11 Track-Type Tractor Systems
Torque Converter and Housing
D11 Track-Type Tractor Systems
Pump Control Valve
FRAME AND BODY
FRAME GP
Show/hide table
| |
| Illustration 1 | g06427265 |
Show/hide table
| Item | Qty | Part | Specification Description |
| 1 | 2 | 8F-9960 O-Ring Seal | Before assembly, apply multipurpose grease to the seals. |
| 2 | 2 | 5P-9217 O-Ring Seal | Before assembly, apply multipurpose grease to the seals. |
| 3 | 2 | 134-4814 Thrust Plate | Install plug after assembly of thrust plate. |
| 4 | 2 | 2M-1309 O-Ring Seal | Before assembly, apply multipurpose grease to the seals. |
| 5 | 2 | 3K-0360 O-Ring Seal | Install plug after assembly of cover. |
| 6 | 2 | 6F-4718 O-Ring Seal | Before assembly, apply multipurpose grease to the seals. |
| 7 | 24 | 1D-4639 Bolt | Torque to |
Show/hide table
| |
| Illustration 2 | g06427308 |
|
View C-C | |
Show/hide table
| Item | Qty | Part | Specification Description |
| 8 | 4 | 153-1857 Bolt | Use the following procedure to tighten the bolts : 1. Install bolts and hand tighten the bolts. 2. Install the bolts and tighten in the sequence of front, back, front, back. Then, tighten to 3. Push the guard against the track roller frame and tighten the bolts to standard torque. |
| 9 | 1 | 489-6477 Pin | Before assembly, wipe pin and bore with new clean, dry disposable towel.
Liberally apply desert gold grease to the pin, saddle seals, and pin bore. Before assembly, E- bar center pin slots must be orientated vertically. |
| 10 | 1 | 3T-7792 Pin(1) | Diameter is |
| 11 | 1 | 1H-8278 O-Ring Seal | Before assembly, apply multipurpose grease to the seals. |
Show/hide table
| (1) | Protect pin from paint |
Information System:
D11 Track-Type Tractor Systems
Torque Converter and Housing
D11 Track-Type Tractor Systems
Transmission
D11 Track-Type Tractor Systems
Bevel and Transfer Gears
Mast Group Retainer Bar May Fail on Certain MD6250 Rotary Drills {79NS}
Mast Group Retainer Bar May Fail on Certain MD6250 Rotary Drills {79NS}
Wire Insulation May Deteriorate On Certain MD6200, MD6250, and MD6310 Rotary Drills {1439}
Wire Insulation May Deteriorate On Certain MD6200, MD6250, and MD6310 Rotary Drills {1439}
New Implement Software Available for D6 Track-Type Tractors {5701, 7610, 7620}
New Implement Software Available for D6 Track-Type Tractors {5701, 7610, 7620}
Human Machine Interface (HMI) Premium Displays for Industrial Engines
Display Features
Human Machine Interface (HMI) Premium Displays for Industrial Engines
Display Settings
Human Machine Interface (HMI) Premium Displays for Industrial Engines
Display Setup
D11 Track-Type Tractor Systems
Torque Converter
Human Machine Interface (HMI) Premium Displays for Industrial Engines
Display Module - Flash Program
D11 Track-Type Tractor Systems
Ripper Tilt Control Valve
D11 Track-Type Tractor Systems
Pump Control Valve
D11 Track-Type Tractor Systems
Equalizer Bar
D11 Track-Type Tractor Systems
Equalizer Bar - Lubrication
D11 Track-Type Tractor Systems
Fast Fill Fuel Adapter
D11 Track-Type Tractor Systems
Wiring (Platform)
Motor Planetary Shaft May Be Misassembled on Certain 988K XE Wheel Loaders {5073, 5927}
Motor Planetary Shaft May Be Misassembled on Certain 988K XE Wheel Loaders {5073, 5927}
D11 Track-Type Tractor Systems
Steering Clutches and Brakes
D11 Track-Type Tractor Systems
Accumulator (Hydraulic)
D11 Track-Type Tractor Systems
Battery and Wiring Group
D11 Track-Type Tractor Systems
Window Wiper Motor
Cat<SUP>®</SUP> GRADE System for D6 Next Generation Track-Type Tractors
Firmware Upgrade
D11 Track-Type Tractor Systems
Window Wiper and Wiper Motor